PDA

View Full Version : m-60 not cutting


m60 tank
04-29-2011, 09:59 PM
hey everyone. having a little trouble with my m60 cubcadet zero turn mower.. i have put new blades on and have replaced the belt,and still when i cut the center blade doesnt cut very well the two outside blades cut fine. and center blade is not cuttin.. please help is it a way to adjust belt tension..

topsites
04-29-2011, 10:00 PM
Have you tried the owner's manual?

ProStreetCamaro
04-29-2011, 10:43 PM
Has it always been like this or is this problem new?

WJC
04-29-2011, 11:00 PM
Blades not on upside down is it?

gibbonsballer10
04-30-2011, 01:13 AM
Problem #1: Its a cub cadet
Problem # 2: Its a cub cadet

TNGrassCutter
04-30-2011, 01:17 AM
Problem #3: you guessed it, its a cub cadet. It's not one of those new ones they advertise with a steering wheel is it? Because that would be problem #4.
Posted via Mobile Device

KINGMADE
04-30-2011, 04:52 AM
Problem number 5... you asked a question on a forum with a bunch of a$$holes waiting to reply.

ProStreetCamaro
04-30-2011, 07:12 AM
Problem #1: Its a cub cadet
Problem # 2: Its a cub cadet


Yup because those Tanks just cut TERRIBLE.

Thick wet lush spring growth here on heavily fertilized lawn cut with a Tank M48. See how bad those Tanks cut?

http://img.photobucket.com/albums/v426/prostreetcamaro/uckingaround002vt2.jpg

MOHUSTLER
04-30-2011, 10:52 AM
Problem number 5... you asked a question on a forum with a bunch of a$$holes waiting to reply.

HAHAHA that made me laugh out loud.

make sure your deck is in proper pitch.

joshnwright
05-13-2011, 09:32 PM
I LOVE both my tanks my 2005 works good but I would put my 2011 against ant thing that cuts grass! But to your problome check the spring that tentions the main belt It is attatched to the arm that is on your left hand pully cove (left hand while sitting on the mower) I have had to replace mine 1 time in 1100 hrs also make shur the belt is routed rite it route weird good luck dont worry about thes guys that like over paying for a red or green paint job haha

StanWilhite
05-13-2011, 09:47 PM
Problem number 5... you asked a question on a forum with a bunch of a$$holes waiting to reply.

:laugh::laugh::laugh::laugh:

jacup84
05-14-2011, 07:40 AM
mine would do the same thing well it would leave alot of hit and miss spots. my problem was the bushing inside the tensionor was bad. went to local parts place got one for 3 dollars beat it out slide new one in cut beautiful. lays stripes just like my buddy's scag

MOHUSTLER
05-14-2011, 10:06 AM
mine would do the same thing well it would leave alot of hit and miss spots. my problem was the bushing inside the tensionor was bad. went to local parts place got one for 3 dollars beat it out slide new one in cut beautiful. lays stripes just like my buddy's scag

your buddys scag must of had dull blades then :laugh::laugh: jk. cub lays decent stripes.