PDA

View Full Version : Tires question


mostaza
05-28-2011, 01:27 PM
question - What does the 24 measure in a 24-11-10 tire? Can I put a 22-11-10 tire on where I currently have a 24-11-10?

thanks,
Evan

grasscommanders
05-28-2011, 09:53 PM
Height of the tire, u can put the smaller one on but adjust accordingly on the deck
Posted via Mobile Device

mostaza
05-29-2011, 12:45 AM
thanks! I'm also wondering if I can put a 24-12-10 in place of a 24-11-10. Not sure what the middle # stands for.

grasscommanders
05-29-2011, 09:52 AM
Middle is for width, id bet u could put them on too
Posted via Mobile Device

grasscommanders
05-29-2011, 09:53 AM
And while we are at it the last is for rim size
Posted via Mobile Device

mostaza
05-30-2011, 12:31 AM
thanks so much grasscommander!! I decided to go with a 22x11x10. Do you think this will affect handling or anything else due to the lesser width (current tires are 24x11x10). God bless you, mostaza.
If you get this, I'd greatly appreciate it if you could say yay or nay while I can still cancel my order, but if not, no sweat. Thanks for all your help.

grasscommanders
05-30-2011, 09:24 AM
Shouldnt really affect the handling, just make sure when you go to put them on the mower that you measure the deck hight front and back and the adjust it to that height after the new tires. It shouldnt change it that much but you want to make sure that the front of the deck is not higher than the rear. What tires did you order and where from? I want some that size for my toro.
Posted via Mobile Device

mostaza
05-30-2011, 10:39 AM
tiresunlimited.com is where I got em. Good price - 150 for the 2 of them + 20 bucks for air shipping. I got Carlisle turf masters. It was about time I got turf masters as I've had turf bosses on my dixie chopper and they do nothing but tear up the ground it seems. Thanks again for all your help!