PDA

View Full Version : Cub Cadet M60 Tank PTO Problem


ocso125
05-30-2011, 10:41 PM
The blades on my M60 tank will not engage right away when turned on. I have to rock the mower back and forth and they will eventually engage. Any thoughts on what might be causing this?

Dstosh
05-30-2011, 11:06 PM
There are 3 9/16 bolts on the clutch. Tighten them about a 1/4 of a turn each.

Nickcon404
05-31-2011, 12:04 AM
There are 3 holes on the clutch under the 9/16 bolts to measure the gap with a feeler gauge. Make sure they are each at 15 thousandths. If not you will ruin the clutch.

flatlander42
05-31-2011, 12:13 AM
Wow, two bits of advice w/o any smartarse comments. That must be a record!

on that note...I sadly have nothing to add....lol!