PDA

View Full Version : 20 foot long, 6 ft corrugated drain pipe?


icex
06-04-2011, 09:57 PM
Anyone know a rough price for a 20 foot long, 6ft corrugated drain pipe?

talus
06-05-2011, 01:39 AM
Thats a big piece of pipe.

icex
06-05-2011, 01:43 AM
10 or 20 ft long will be fine. I just need a rough estimate on price.

White Gardens
06-05-2011, 01:45 AM
I think he was referring to the fact that it's 6 feet in diameter.

icex
06-05-2011, 01:55 AM
Yeah, I diden't know how to say it. 6 feet in diameter, 20 foot long/10 foot long

talus
06-05-2011, 02:21 AM
Thats a big piece of pipe. I'm guessing it's pricey though.$2500 ish ?

Dirtman2007
06-05-2011, 09:09 AM
I'm not sure how big the make plastic pipe. Biggest I've put in in plastic was 48". Not sure what it would be in metal or aluminum. But I'd figure 100 bucks a foot to be covered
Posted via Mobile Device

tbone1471
06-05-2011, 12:02 PM
I bought a piece of metal corrugated pipe 18ft long and 4.5ft dia for about 350 from the local steel liquidator. It was recovered intact from some building demo. The price new was something like 1200.

Treemow
06-05-2011, 12:15 PM
Like this. They don't make plastic that big. This is corrugated steel. $3200.00 for 40 feet.

icex
06-05-2011, 10:42 PM
Actualy I just put a 20ft, 6ft diameter drainpipe in corragated plastic awhile back. I diden't order it though, the customer did.

Treemow
06-05-2011, 10:48 PM
Actualy I just put a 20ft, 6ft diameter drainpipe in corragated plastic awhile back. I diden't order it though, the customer did.

Can you post a pic of it.

icex
06-05-2011, 10:51 PM
Can you post a pic of it.



It is covered with concrete/gravel and on the ends they set concrete blocks weighing 3500 pounds a peice so the flood waters coulden't wash out around it. It may just be 10 foot long but I'm pretty sure its 20 foot long. I'm not over in that area much but next time I'm over there I will take a picture of it if I remember.

dozerman21
06-05-2011, 11:58 PM
It is covered with concrete/gravel and on the ends they set concrete blocks weighing 3500 pounds a peice so the flood waters coulden't wash out around it. It may just be 10 foot long but I'm pretty sure its 20 foot long. I'm not over in that area much but next time I'm over there I will take a picture of it if I remember.


HDPE pipe only goes to 60" diameter...at least that's all I've ever seen available.

Dirtman2007
06-06-2011, 12:12 AM
oh yeah I forgot to mention ask the pipe place if they have any factory rejects, kinda like a scratch and dent. Sometimes they have pipe that comes out at 72" on oneside and 68" on the other, you can't really tell it but if your only using one stick it can save you about 50%

scholzee
06-06-2011, 08:17 AM
Like this. They don't make plastic that big. This is corrugated steel. $3200.00 for 40 feet.

And he is smashing the end of it with a dozer !!!!!!

Dirt Digger2
06-06-2011, 10:11 PM
prices vary depending on area and cost of steel at the time...

just call your local pipe dealer...they don't track you down and bill you for a simple estimate

try these guys...

http://www.contech-cpi.com/

Treemow
06-07-2011, 12:50 AM
And he is smashing the end of it with a dozer !!!!!!

Ever tried to place a 40' x 6' piece of steel pipe. The ends get bent and are straightened with an excavator.

Treemow
06-07-2011, 01:05 AM
In place with ends straightened lol.