PDA

View Full Version : Wright Stander X Review


whoopassonthebluegrass
06-06-2011, 11:37 AM
Okay, so my title is a bit misleading.

I am LOOKING for reviews of the Stander X, now that it has been in action for a few months.

I bought a mower with an unproven deck once, and that was a near-catastrophic mistake for my business.

So, Owners, how does it cut? How does it clump? How well does it handle that speed? What are the weaknesses of the unit?

Thanks!

grassman177
06-06-2011, 09:29 PM
good thread man, i was impressed with the cut when demoing one, but the toro was better. however, i did not get to cut spring grass with it. it did however do a great job of dispersal of clippings.

anzxious to hear others spring reviews too.

whoopassonthebluegrass
06-07-2011, 12:11 AM
Thanks, Grassman. You've obviously grown in your affection for the Grandstands.

I would like to point out, however, that when you were demoing, you just couldn't decide. But, rather, you finally chose the Toro because of its proven deck - unwilling to be a guinea pig with Wright's new one. :)

Sooooo, seriously... does NOBODY own one of these machines? C'mon, peeps! Hook a brotha up!

whoopassonthebluegrass
06-07-2011, 12:14 AM
As a side note, was quoted $8,750 today by the local shop that is allegedly a dealer, but doesn't have so much as a brochure for the company. Had to make phone calls to check pricing and availability.

Yeah, like I want THOSE guys doing work on my machine... <picture me making weird fart noise in tandem with a big thumbs down>

whoopassonthebluegrass
06-07-2011, 11:53 AM
Does NOBODY own this mower?

Perhaps I need a more direct thread title...

turfbuilder
06-14-2011, 11:45 PM
As a side note, was quoted $8,750 today by the local shop that is allegedly a dealer, but doesn't have so much as a brochure for the company. Had to make phone calls to check pricing and availability.

Yeah, like I want THOSE guys doing work on my machine... <picture me making weird fart noise in tandem with a big thumbs down>

You can pick one up in Dec. for $7350.00 plus tax.

I am interested in the X also. We are running 4 of the regular Standers now.

ArieMcD
12-17-2011, 06:49 PM
At long last, I finally got it. I say at long last because, I researched the hell out of the:

Toro Grandstand 48" (Very Smooth Controls)

eXmark Vantage (Same as Toro)

Wright Stander X (Fast As Hell) (Touchy Controls)(arguably better Kaw Engine)(Better Balanced).

My Wright was delivered today and I have been out, the last 2 hours, in the freezing cold (By North Carolina Standards) getting a good feel for it and testing it in some wet grass.

I must say, It is performing very well though the "Standard Stripping Kit" does not seem to be that great. I hope it is just because the grass is fairly wet because if not, my old eXmark Phazer 42" strippes better with no kit.

As for the cut, it is very very good and did not have to double cut. There was also no clumping. I will take pics of the underside of the deck tomorrow and post them if ya'll are interested (Got Dark).

I am by no means a pro, I only cut a fews lawns per week for extra change. I do like to buy quality machines and the Wright Stander X is pretty sweet so far.

If you have any request, let me know and I will be happy to try and help out.

pugs
12-17-2011, 07:02 PM
At long last, I finally got it. I say at long last because, I researched the hell out of the:

Toro Grandstand 48" (Very Smooth Controls)

eXmark Vantage (Same as Toro)

Wright Stander X (Fast As Hell) (Touchy Controls)(arguably better Kaw Engine)(Better Balanced).

My Wright was delivered today and I have been out, the last 2 hours, in the freezing cold (By North Carolina Standards) getting a good feel for it and testing it in some wet grass.

I must say, It is performing very well though the "Standard Stripping Kit" does not seem to be that great. I hope it is just because the grass is fairly wet because if not, my old eXmark Phazer 42" strippes better with no kit.

As for the cut, it is very very good and did not have to double cut. There was also no clumping. I will take pics of the underside of the deck tomorrow and post them if ya'll are interested (Got Dark).

I am by no means a pro, I only cut a fews lawns per week for extra change. I do like to buy quality machines and the Wright Stander X is pretty sweet so far.

If you have any request, let me know and I will be happy to try and help out.

You can make the controls a bit less touchy at the cost of speed if you wish. On the newer ones the adjustment is down by the pumps. Put the control rods in another set of holes on each side. It will slow the machine down a bit while making it less twitchy.

As for the striping kit, on the newest versions its adjustable up/down. So you might want to check and see if when you are in your cutting position it is actually down on the grass. The original design it was in a fixed position so at about 3.25 or 3.5" it was basically on the ground. The lower you went the more it folded up. I have not unpacked the newest X model we just got on our spring order so I do not know where they are setting them at the factory. Could be in the highest setting causing you to get no contact with the grass.

ArieMcD
12-17-2011, 07:47 PM
You can make the controls a bit less touchy at the cost of speed if you wish. On the newer ones the adjustment is down by the pumps. Put the control rods in another set of holes on each side. It will slow the machine down a bit while making it less twitchy.

As for the striping kit, on the newest versions its adjustable up/down. So you might want to check and see if when you are in your cutting position it is actually down on the grass. The original design it was in a fixed position so at about 3.25 or 3.5" it was basically on the ground. The lower you went the more it folded up. I have not unpacked the newest X model we just got on our spring order so I do not know where they are setting them at the factory. Could be in the highest setting causing you to get no contact with the grass.

I will give it a shot. Thanks for the information :cool2:

grassman177
12-17-2011, 07:47 PM
Thanks, Grassman. You've obviously grown in your affection for the Grandstands.

I would like to point out, however, that when you were demoing, you just couldn't decide. But, rather, you finally chose the Toro because of its proven deck - unwilling to be a guinea pig with Wright's new one. :)

Sooooo, seriously... does NOBODY own one of these machines? C'mon, peeps! Hook a brotha up!

hah, never even saw the reply you gave!

i was on the fence. it was a hard decision. we are very happy

however, in the end after running wrights frame for years(the deck does not make the mower body control any dif) and now having a full season on the toro, i can say that it is still better in every way except simplicity. it is more complicated. in fact, they have uncomplicated the drive linkages on new models and made it retroactive on service bulliten. i plan on having my ground speed contol taken off like the new ones, and a simpler set installed. they have some play in them, that is getting worse. removin the old linkages from that is the direct cause and under warranty/bulliten,

however, i have heard some great reviews on this deck, but not from here. we seem to be quite the dif climate and conditions from most and it is very tough mowing. i think they did however have great success and i think it is prob a very capable deck.

interesting fact, my dealer who sells both have sold 2 wrights in 2011, and almost countless toro.

ArieMcD
12-17-2011, 08:35 PM
Was tough for me too. So much so, it started to get on my nerves. I guess the deciding factor for me were the controls. The Wright seemed to make more sense and I was able to hop on and go. As for the cut, I must admit the Toro is a bit better a fact o knew going in. Only time will tell how long this machine will be in the family.

c2weech
12-17-2011, 09:29 PM
At long last, I finally got it. I say at long last because, I researched the hell out of the:

Toro Grandstand 48" (Very Smooth Controls)

eXmark Vantage (Same as Toro)

Wright Stander X (Fast As Hell) (Touchy Controls)(arguably better Kaw Engine)(Better Balanced)


What do you think about the motor being on the deck? With it being a floating deck do you worry about the motor bouncing around and causing damage? I have some bumpy lawns and this is the only part about the stander x that makes me think about not buying it otherwise I think it is a great machine

My Wright was delivered today and I have been out, the last 2 hours, in the freezing cold (By North Carolina Standards) getting a good feel for it and testing it in some wet grass.

I must say, It is performing very well though the "Standard Stripping Kit" does not seem to be that great. I hope it is just because the grass is fairly wet because if not, my old eXmark Phazer 42" strippes better with no kit.

As for the cut, it is very very good and did not have to double cut. There was also no clumping. I will take pics of the underside of the deck tomorrow and post them if ya'll are interested (Got Dark).

I am by no means a pro, I only cut a fews lawns per week for extra change. I do like to buy quality machines and the Wright Stander X is pretty sweet so far.

If you have any request, let me know and I will be happy to try and help out.
Posted via Mobile Device

ArieMcD
12-17-2011, 09:43 PM
Not sure what to think.

Part of the time I was out today with the machine, I cut a huge Duke Power right of way. Full of bumps and everything else. The motor/deck did bounce a bit but nothing I think would be of any concern. Also, this was the area I let her fly and the most. Faster than most would cut grass especially if you know there are terrible bumps. No worries from me.:walking: