PDA

View Full Version : 14' Mower trailer


cuttin-to-the-Max
06-17-2011, 01:40 AM
For Sale
8x14 Tandem Axle
3500 Axles
Shelves, trimmer racks, and tool box
Price is $1800
Looking to upgrade to a 20' Enclosed trailer.

http://s3.racingjunk.com/ui/4/10/22106104-210-8X14-Landscaping-SkidSteer-Trailer.jpg
http://70.85.43.66/attachment.php?attachmentid=223035&stc=1&d=1307395026

exmarkguy123
06-18-2011, 06:32 PM
Nice trailer. I'm considering.

cuttin-to-the-Max
06-18-2011, 06:47 PM
Nice trailer. I'm considering.

Thanks let me know

because otherwise im just going to keep it. Really starting to realize what a good trailer it is, after looking at what else is on the market.
Posted via Mobile Device

sweetjetskier
06-18-2011, 09:59 PM
Can this trailer carry a skid steer? The ramps look strong enough?
Posted via Mobile Device

cuttin-to-the-Max
06-18-2011, 11:06 PM
Can this trailer carry a skid steer? The ramps look strong enough?
Posted via Mobile Device


Yes it can I had a fabricator Reinforse my gate so I can pull a skid... Without falling through the gate.
I have a mini and mid size one and it loads and pulls fine! with my mowers going up and down the ramp all day i can really ruin a gate with no supports! Other than mesh.
Posted via Mobile Device

YardGal
06-20-2011, 12:18 PM
Nice trailer!

rcslawncare
06-20-2011, 07:28 PM
Looks so long for a 14 footer, but holds everything nice! Wish I had the cash to upgrade to a double axle.

cuttin-to-the-Max
06-20-2011, 07:37 PM
Looks so long for a 14 footer, but holds everything nice! Wish I had the cash to upgrade to a double axle.

You're right it "Looks" longer than it is. When you put everything on it, you realize its really not that big. I cant even get a Walk behind on my trailer with the 2 ZTR's.....I keep my 36 in the dump bed. My guys love the workout of lifting it out! :weightlifter::dizzy:

cuttin-to-the-Max
06-22-2011, 12:17 AM
bumppppppppppppppppppppppppp

GardnerLawn
06-25-2011, 11:13 AM
nice trailer but too much $

cuttin-to-the-Max
06-25-2011, 05:03 PM
nice trailer but too much $

how much should it be?
i plan on keeping it!

advance lawn care
07-19-2011, 05:07 PM
Where are u located?

cuttin-to-the-Max
07-19-2011, 05:08 PM
Where are u located?

Oakland County Michigan

sweetjetskier
07-20-2011, 09:36 PM
How was the suspension and 'welds' reinforced?

Did you upgrade axles,springs,mounts?

Why would one reinforce welds?

The factory that built the trailer wasn't competent at welding?

Top tube, square tube or rectangular tube trailers are some of the strongest made, no modifications needed.
Posted via Mobile Device

4 seasons lawn&land
07-20-2011, 09:52 PM
My 14 ft fits my 2 zero turns by about 6 inches. You have 2 1/2 feet. I think thats a 16

cuttin-to-the-Max
07-21-2011, 01:06 AM
How was the suspension and 'welds' reinforced?

Did you upgrade axles,springs,mounts?

Why would one reinforce welds?

The factory that built the trailer wasn't competent at welding?

Top tube, square tube or rectangular tube trailers are some of the strongest made, no modifications needed.
Posted via Mobile Device

Yes the axles were smaller, and springs. i bought the trailer used after the guy had it for one year. THe fender was almost broken off! The wiring for the brakes were bad from the factory! The other guy never even plugged up the lights! IDK What his problem was! Contacted the factory and they redid the wiring and breaks last year. For freeWhen we wanted to use the trailer for hauling mowers and a skidsteer we decided to "beef it up a little"

cuttin-to-the-Max
07-21-2011, 01:10 AM
My 14 ft fits my 2 zero turns by about 6 inches. You have 2 1/2 feet. I think thats a 16

I was told it is a 14 but to be honest with you i bought this trailer when i was in a pickle (right after my gate fell off my enclosed....middle of the season!).
I never measured it but i know its 8FT by 14 or 16...
I could JUST get my 72" dixie in there!
Maybe its 14 from the shelf back....

lazor-cut
05-10-2012, 09:15 PM
Bump to the top