PDA

View Full Version : Z spray Jr '09 for sale


Rayholio
06-21-2011, 12:30 PM
This is a 2009 Zspray Jr

It has intermediate tires, but also comes with the origional Jr tires

I added the Hypro nozzel, and in the pics it's broken off... it comes with the blue, and the green tip... you will need a fitting to return it to operational status.. should cost a couple bucks.

I have lost the GPS speedometer. They're $100.00 to replace.. and since no one uses them anyhow.. I didn't replace it.

Not pictured, it comes with the origional rain cover (a little dirty), a foot switch, and any other parts I find laying around for it.

It was my primary applicator for '09, and I phased it out early in 2010 and collected dust. with 270+ hours, it's like new.

looks like from LT Rich, this machine would be about $8,500 + $300ish for the wheels, and probably $50ish for the hypro nozzle... so $8850 for a similar machine from L.T. Rich direct + freight shipping ($400 to me I believe)

so if you're in my neck of the woods, and can do a local pick up, you would already save $3250.00 with my current price.

My price is very fair, and is firm. If you were to call LT rich, they would explain to you that there is like a 4 month wait for a new machine right now.. this one is ready to work right now.

After 6 months in storage, thru the winter, I started it up with zero problems... ran immediately and very well.. It's a strong machine.

Please see the pic of the rewelded wheel caster.. it was professionally done, but they didn't have access to stainless welding tools... It has been properly clear coated, and is not rusting. I've used it on this weld for about 150 hours. It's like new.

I used this machine for 5 days this season (2011).. so it's not quite as clean as it is in these pics anymore.. The starter sylonoid ($18) is starting to act up from time to time.. but still starts every single time.. would be a good part to keep on hand. Everything still runs great.. 100%

I did just drop the price a lot.. I listed this at $7500 last year, and it was a little more than the market could bare... Now, I'm in a disaster situation, and need to move the machine. for cash, or something more useful. I will consider trades.

My phone number is 417.623.GROW.

http://www.mediafire.com/imgbnc.php/bc8591e69955c39d117afba3fe19025883737ca740759bae71aa3d133e03d8dd5g.jpg

http://www.mediafire.com/imgbnc.php/debe4547882db12b309a8494e3c04d377815a715d3f8fc7c4382c90bad9b0b135g.jpg

http://www.mediafire.com/imgbnc.php/43195b27abc564b71866eebb40678bf0ee5381fb7bee490e4139e47f7f3349355g.jpg

http://www.mediafire.com/imgbnc.php/5b2d4995e32b8da843c0a321b185ed12a93dc27e68f53053d94fc3ac1c937bcd5g.jpg

http://www.mediafire.com/imgbnc.php/87d66dc77b193f198332d3fb17f234e062ac03fd464d923b1bec5f6218801e255g.jpg

http://www.mediafire.com/imgbnc.php/1d3cdc5663b837776dcf6230c5296424282efe6c134e4d6bd5224723428e15865g.jpg

http://www.mediafire.com/imgbnc.php/ac048d1f759fc1e5eb9584f8985255f5b7c7e84a88ba0824d75abef042cad0c45g.jpg

djagusch
06-21-2011, 10:02 PM
So is the current price $5500 or what?
Posted via Mobile Device

djagusch
06-21-2011, 10:06 PM
Very tempted to buy this.
Posted via Mobile Device

mtchockey30
06-21-2011, 11:48 PM
Interested in a trade for a 2008 "I think" Wright stander 52/23 with 7xx hrs. "I'll have to check for exact number"?

Rayholio
06-21-2011, 11:57 PM
It's $6,000.. curious; why did you think 5500? did I write something that eluded to that?

as far as mowers.. I'll only consider diesel models for trade.. Sorry :/

djagusch
06-22-2011, 12:00 AM
It's $6,000.. curious; why did you think 5500? did I write something that eluded to that?

as far as mowers.. I'll only consider diesel models for trade.. Sorry :/

$8850-$3250 is $5600.
Posted via Mobile Device

Rayholio
06-22-2011, 01:34 AM
$8850-$3250 is $5600.
Posted via Mobile Device

I see.. :) $8,850+$400 for shipping = $9250.00 - $3,250 = $6,000

Sorry 'bout the confusing math! :)

Snapper12
06-23-2011, 01:43 AM
Ray, I hope everything is ok with the storm. I will 4k and pick it up Friday morning. No$hit.

Snapper12
06-23-2011, 10:41 PM
bump for 3500?

Rayholio
06-28-2011, 04:43 PM
Here's a link to a video of it I took this morning.. Shipping is available at buyers cost.

http://www.youtube.com/watch?v=DNigQiJp8EQ

robertsturf
06-28-2011, 06:57 PM
Glad to hear your doing alright. Good luck with the sale!

teamgreendude
06-28-2011, 09:01 PM
Ray,
did your business suffer down in joplin ? I hope you are alright and my thoughts and prayers are with you and your company. If you need anything I'm just a PM away.

Rayholio
06-29-2011, 07:17 PM
Ray,
did your business suffer down in joplin ? I hope you are alright and my thoughts and prayers are with you and your company. If you need anything I'm just a PM away.

We lost about 15% directly from the tornado.. I'm expecting more like 30%+ when the smoke clears.. I've gotten cancelations for reasons ranging from "I lost my rental property (income)" to "We think we should do it ourselves with all that's going on in town.." (whatever that means?..)

I'm also getting a lot of customers who have sold their house, or just put it on the market because house prices went up 30% over night... those people are mostly leaving town.

People are spooked, and our economy is changing here.. I don't expect a true recovery for years.

It's definately time to trim the fat, and reinvent here in Joplin. But we're doing fine so far :)

robertsturf
06-29-2011, 10:23 PM
I think your price is good. But the price you quoted for the wheels and tires might be off for the Jr wheels and tires $140.00 now from LT Rich. Now for the wider tires I am not so sure. I was thinking of buying a set of the narrow ones for my lawns with the narrow gates. Smaller back yards with no hills!

JJS
06-29-2011, 11:04 PM
how much do you figure it would cost to ship to CT?

Rayholio
06-29-2011, 11:07 PM
Yeah, that price on the wheels was for the intermediate sized ones... It came with the jrs... :)

Shipping would probably be around $400... That's just ballpark

Rayholio
07-05-2011, 02:11 AM
Bump :)

R & R Yard Designs
07-13-2011, 04:55 PM
Ray do you still have it if so can you pm me.
Posted via Mobile Device

Rayholio
07-27-2011, 03:37 PM
Machine still for sale. I will post here when it is gone.... Just don't have time for daily bumps ATM :)

Cheers!

Rayholio
08-08-2011, 03:59 PM
Still got 'er :)

clc2003
08-10-2011, 03:44 AM
Still got 'er :)

What is ur bottom $?
Posted via Mobile Device

Rayholio
08-10-2011, 04:02 AM
$6000.. way cheaper than similar machines.

xtreem3d
08-10-2011, 03:02 PM
is this the one with the one off motor? if it is just curious as to why not a "conventional " motor? i have almost contacted you a couple times because i am close but the motor (if i am right) worries me a little
Steve

Rayholio
08-10-2011, 03:14 PM
yep.. Well.. the motor isn't one-off... but its installation in a Z spray is. :)

I actually like the motor better than the standard engines. LT Rich told me that they didn't make it production because they considered it 'too loud'.... but with the extra torque, I ran it at just a touch over half throttle, and it was actually quieter than compriable engines while operating... It also runs the machine faster than others at full throttle. it also seems to use less fuel..

I'm not sure it's anything to be worried about... but you're welcome to come try it out. :)

Snapper12
12-14-2011, 07:47 PM
Is the machine still for sale?