PDA

View Full Version : 120v Astronomical Timers


Chris J
07-18-2011, 11:39 PM
Anyone have any experience with commercial grade astronomical timers? I need to control 4 corners of an intersection within a subdivision and I'll be pulling power from lamp posts that are on these corners. The problem is that these lamp post circuits are currently on a photocell located at the meter/breaker panel, and I need it to be as maintenance free as possible. (ie, no replacing unreliable PC's or constantly adjusting timers). Looking at the Intermatic ET8015C or the Tork EWZ103. Any Experience with longevity and reliability would be appreciated.

INTEGRA Bespoke Lighting
07-19-2011, 01:31 AM
I have used a lot of the Intermatic ET7000 series in the past and they are very reliable.

Chris J
07-19-2011, 01:56 AM
I need to control two 20 amp circuits/120v, however the load will be greatly reduced when I convert this to LED. Is there a specific model that you use and have found reliable? I specifically need astronomical.
Thanks

INTEGRA Bespoke Lighting
07-19-2011, 02:01 AM
The ET70215C should work. 2 x 20Amp circuits.

http://www.intermatic.com/products/ec%204%20layer/electronic%20time%20switches/365%20day%20advanced%20time%20switches/et70000%20series%201-2-4%20circuit%20models.aspx

Chris J
07-19-2011, 02:45 AM
Also need outdoor rated,

Chris J
07-19-2011, 02:48 AM
Disregard last post. Thanks.

niteliters
07-21-2011, 07:04 AM
nightscaping Ti035 power switch is back, 20 amp I believe. we us inside and in transformers. They have a raintite version you can plug any transformer into