PDA

View Full Version : Enclosed trailer workbench


Jwgarrison6
07-26-2011, 06:09 PM
I have a 7' x 12' enclosed trailer with a v-nose that I would like to put a workbench in (up front). I want to mount my bench grinder on as well as have some storage underneath. Can anyone tell me how to go about doing this, what type of wood to use, how to construct, etc. If anyone has any pics of their enclosed trailer with a workbench in it, I would love to see them. Any help will be greatly appreciated. Thanks!!:confused:

Oakleaf landscape
07-26-2011, 08:08 PM
http://lawnsite.com/showthread.php?t=346647

That has a pic of my workbench in it. I just used 2x4s and plywood to make mine. L brackets hold it to the floor and hold the bench together. It's screwed together with 3 in screws as well. It's not going anywhere.

mlavin73
07-26-2011, 08:39 PM
When I made mine I ran vertical E-track down the sides and front of my trailer. I ordered brackets that go into the E-Track that accept 2 X 4's. I framed it out with that and then cut plywood to fit the top. I got all my bracketry from www.traileroutlet.com. I have pictures in the thread labeled "lets see some trailer setups".