PDA

View Full Version : Toro belt length


anixon92
08-01-2011, 01:19 PM
TORO 30156 36" WALK BEHIND.
parts book shows #1-323629 belt.
does anybody know the length of the belt. try to pick up a aftermarket belt.
thanks
allen

dutch1
08-01-2011, 02:06 PM
Deck belt or traction belt?

My 2006 Gates book list a traction belt, Toro #269670. Gates #6840. 40" belt.
Gates doesn't show a deck belt.

If it's a deck belt, measure it. With a pen, mark a line on the outside of the belt then use a tape measure to work your way around the belt, holding both the tape and belt as you go.

piston slapper
08-01-2011, 03:51 PM
Deck belt or traction belt?

My 2006 Gates book list a traction belt, Toro #269670. Gates #6840. 40" belt.
Gates doesn't show a deck belt.

If it's a deck belt, measure it. With a pen, mark a line on the outside of the belt then use a tape measure to work your way around the belt, holding both the tape and belt as you go.

Thats a 1/2" belt 40 inches long

Just though I'd tighten up the measurements...

Dutch...check you PM's

anixon92
08-01-2011, 03:58 PM
its the belt going from motor to deck.
i got the other shorter belt going from motor to transaxle.
i need the one from motor to deck.
i dont have one to measure, mower came without belt.

piston slapper
08-01-2011, 04:10 PM
Sorry., I dont have a listing on that belt

Restrorob
08-01-2011, 06:39 PM
Well heck.... I couldn't even pull a hat trick on that one !

My guess is it's a odd size due to so little adjustment on the tension idler arm, But I did find this to be the cheapest place I ran across to get one; http://www.mowpart.com/m7/Toro/p136867/Belt,Blade-Drive-Toro/product_info.html