PDA

View Full Version : Bobcat Fastcat Pro 61 deck belt size?


HenryB
08-05-2011, 01:13 PM
Trying to figure out the length of the main deck to engine belt. It's long because it's a single belt instead of two. Anyone know the size? Thanks in advance.

pugs
08-05-2011, 02:15 PM
Go to Bobcat and get 4163569

dutch1
08-05-2011, 02:24 PM
Just a stab in the dark. Can you make out the OEM number on the belt? My Gate book states that it should be #2188128. If that should be the case, the Gates number 6530BR and it is a 65 3/8" belt. Check with NAPA as they handle Gates products.

HenryB
08-06-2011, 10:10 AM
Someone suggested a "154" in belt. That's big.

pugs
08-06-2011, 11:18 AM
Someone suggested a "154" in belt. That's big.

Thats also why you will most likely end up with a belt that says CGC or SGC on it. Knowing the length is pointless since most belt manufacturers make belts every inch up to about 100 or 115 inches. After that they start skipping every 3-5 inches. And that only goes to about 130 if that. So you could refer to my previous post and get the machine cutting grass again, or you can continue a silly quest to find an aftermarket belt that probably doesnt exist and wont save you anything anyway.

List price on the bobcat belt is 87.17.

HenryB
08-06-2011, 01:52 PM
Thats also why you will most likely end up with a belt that says CGC or SGC on it. Knowing the length is pointless since most belt manufacturers make belts every inch up to about 100 or 115 inches. After that they start skipping every 3-5 inches. And that only goes to about 130 if that. So you could refer to my previous post and get the machine cutting grass again, or you can continue a silly quest to find an aftermarket belt that probably doesnt exist and wont save you anything anyway.

List price on the bobcat belt is 87.17.

No silly quest. Machines not down. I just wanted to keep an extra. I always do. My dealer wanted over $100 for the belt. So should I be dealer loyal?

pugs
08-06-2011, 02:24 PM
No silly quest. Machines not down. I just wanted to keep an extra. I always do. My dealer wanted over $100 for the belt. So should I be dealer loyal?

I cant answer that, but just saying you are going to most likely have to get the belt from some Bobcat source, whether it be your dealer or another dealer or someplace that sells Bobcat parts online. There probably is no alternative to the genuine Bobcat belt at this time.