PDA

View Full Version : Pull cord broke on Trimstar 36 - Kawasaki FH 430v


HondaGuy28
08-05-2011, 10:06 PM
So, broke my pull cord today on my Trimstar 36.. I took the top screen off that has the coil inside, fixed the cord and put it back just as I took it off. Pull cord will start the engine but will not RECOIL.. I winded it up 3 rotations - no luck. Then 4, then 5. There is plenty of tension built up, but when I tighten the screw enough to how it was originally, no recoil. I loosen the torque on the screw a bit and the cord recoils great....BUT the screw unwinds itself after 2 pulls.

Will post pictures in an hour or so.. For now just hoping some one can spot something I mite have missed!! I don't want to have to the dealer tomorrow because I am already a day behind..any

I checked my Hustler book and the Kawi book will no luck on installing - only removing :/

HondaGuy28
08-05-2011, 11:49 PM
The silver backplate that the coil spring sets in wasnt properly seated