PDA

View Full Version : another toro hydro problem


Gianninilandscaping
08-14-2011, 02:56 PM
I just rebuilt the pump on my toro hoping that it would solve the chatter problem but now i have back pressure in the tank and oil is shooting out of the cap on the hydro tank...


anyone have this problem before?

MoGreen
08-15-2011, 09:25 AM
What brand pump is it? I have asked a few times about Eaton 778 hydro pump rebuilding and haven't gotten many responses here. Where did you find your internal parts for it?
Good luck with your repair though!!

piston slapper
08-15-2011, 09:49 AM
Sounds like you overfilled the tank.

Gianninilandscaping
08-15-2011, 06:38 PM
What brand pump is it? I have asked a few times about Eaton 778 hydro pump rebuilding and haven't gotten many responses here. Where did you find your internal parts for it?
Good luck with your repair though!!

i didnt put any new internals in it.... i just put new seals and o-rings in it

Gianninilandscaping
08-15-2011, 06:40 PM
Sounds like you overfilled the tank.

i filled it to the middle of the lower and higher baffel

ricky86
08-15-2011, 07:34 PM
Did you 1) Pre-fill the pump before attempting to start. All that air has to go somewhere. 2) Switch the suction and return hoses by chance. Some you can, most you can't. With no numbers, nobody really knows what your working on.