PDA

View Full Version : What size blades on my Bobcat Ransomes?


ejjones55
09-02-2011, 07:48 AM
I just bought an older Bobcat Ransomes WB. Model XM3609.

What size blades should be on this mower?

thanks

dutch1
09-02-2011, 12:41 PM
There are 3 or 4 deck sizes which you didn't specify so help yourself at the following link.

http://cgcequip.arinet.com/scripts/EmpartISAPI.dll?MF&app=CGC54&TF=EmpartWeb&partner=CGCSB&lang=EN&loginid=CG999990&loginpwd=2006CGC1030

pugs
09-02-2011, 02:05 PM
There are 3 or 4 deck sizes which you didn't specify so help yourself at the following link.

http://cgcequip.arinet.com/scripts/EmpartISAPI.dll?MF&app=CGC54&TF=EmpartWeb&partner=CGCSB&lang=EN&loginid=CG999990&loginpwd=2006CGC1030

Its a 36" deck. 36 in the model number is the deck size.

dutch1
09-02-2011, 02:22 PM
Thanks, Pugs. I thought that might be a possibility, but haven't seen any Bobcat equipment for some time and most of what I've had in the shop is Z-turn stuff.

piston slapper
09-02-2011, 02:27 PM
The blades would be : 18" x 5/8 center hole ( 2 Blades)

Sharpcut 1
09-02-2011, 03:34 PM
The blades would be : 18" x 5/8 center hole ( 2 Blades)

That was the least amount of thinking you had to do today!!

ejjones55
09-03-2011, 02:40 PM
thanks everybody
I thought they needed 18s, I cut my grass and i was getting an uncut strip down the center, so I checked under deck and blades are not coming close together.
I measured and they are 16s.

If its not one thing with this investment, its another. Still spraying down the variable speed pulley with wd40 trying to free that up so I don't have to jog while mowing!

thanks again

ejjones55
09-03-2011, 02:41 PM
Oh and any recommendations on blades? mulcher blades, standared blades?

I do not bag and have an open side shoot.

thanks