PDA

View Full Version : a quick question


1idejim
09-03-2011, 04:16 PM
this was a bad link, caught it just in time................................

Mike Leary
09-03-2011, 04:25 PM
this was a bad link, caught it just in time................................

another one of your porno sites? ;)

1idejim
09-03-2011, 04:29 PM
another one of your porno sites? ;)

yea, lawnporn.......there is an asic member near me and i was wondering if anyone knew of her. she offers troubleshooting classes, i might like to attend.

Mike Leary
09-03-2011, 04:36 PM
yea, lawnporn.......there is an asic member near me and i was wondering if anyone knew of her. she offers troubleshooting classes, i might like to attend.

Always wondered what happened to SHESHOVEL. :rolleyes:

Wet_Boots
09-03-2011, 04:56 PM
SHE doesn't shoot trouble, she starts it. :)

FIMCO-MEISTER
09-03-2011, 05:36 PM
While sucking on a rum and oj at my campsite i pulled out my dynatel 573a to get familiar with it in case Jim can meet up with me. So im trying to install 6volt batteries and discover the cables in the 573 are for the screw in post types and the 6 volt i bought have this dumbass springs for posts. So im debating whether to covert the dynatel cables to clamps or something or order the old style 6v batteries. How have others handled the transition from screw post batteries to spring post batteries?
Posted via Mobile Device

Wet_Boots
09-03-2011, 05:41 PM
Just get the old-style batteries from Grainger.

Mike Leary
09-03-2011, 05:45 PM
Drink more rum, the answer will be clear. By the way, where's the pics?

Wet_Boots
09-03-2011, 05:48 PM
Also, consider a conversion to run on NiMH battery packs.

Mike Leary
09-03-2011, 05:54 PM
Also, consider a conversion to run on NiMH battery packs.

Don't distract him, you nimrod, that's a pretty part of the country: pics first. :hammerhead::drinkup::waving:

FIMCO-MEISTER
09-03-2011, 06:00 PM
If i could figure out how to post pics on LS from my phone using the mobile version i will.
Posted via Mobile Device

Wet_Boots
09-03-2011, 06:13 PM
so use your Rainmaster remote to post the photos, if it's all that :)

Mike Leary
09-03-2011, 07:18 PM
Typical piker who resisted the optional double mirror RM camera attachment.

1idejim
09-03-2011, 07:39 PM
Typical piker who resisted the optional double mirror RM camera attachment.

what happened to the 'stash boss?

ArTurf
09-03-2011, 07:48 PM
While sucking on a rum and oj at my campsite i pulled out my dynatel 573a to get familiar with it in case Jim can meet up with me. So im trying to install 6volt batteries and discover the cables in the 573 are for the screw in post types and the 6 volt i bought have this dumbass springs for posts. So im debating whether to covert the dynatel cables to clamps or something or order the old style 6v batteries. How have others handled the transition from screw post batteries to spring post batteries?
Posted via Mobile Device

I had trouble finding the screw post 6 volt in my area and when I did they were 2-3 times the cost of spring.

Mike Leary
09-03-2011, 07:49 PM
what happened to the 'stash boss?

Get some cool new implants, and 'stash gone. Wife much happier.

Mike Leary
09-03-2011, 07:53 PM
I had trouble finding the screw

Take a shower, get a shave.

FIMCO-MEISTER
09-03-2011, 08:47 PM
I had trouble finding the screw post 6 volt in my area and when I did they were 2-3 times the cost of spring.

That is exactly why im thinking its best to just put on alligator clips and use spring post batteries.
Posted via Mobile Device

Wet_Boots
09-03-2011, 09:00 PM
Don't do it. You need current. That's why the screw post batteries.

Mike Leary
09-03-2011, 09:04 PM
Don't do it. You need current. That's why the screw post batteries.

Always wondered why screw posts were invented.

1idejim
09-03-2011, 09:10 PM
Don't do it. You need current. That's why the screw post batteries.

you can use a machine screws, bolts and 2 washers on each spring, clip the lead to the new post. it'll work well.:)

Wet_Boots
09-03-2011, 09:17 PM
You could solder a brass screw into place, if it comes to that, but if you are going to dink around, you might as well look into NiMH battery backs.

Mike Leary
09-03-2011, 10:04 PM
You guys kill me with the "info". We've been soldering in screws forever.

Wet_Boots
09-03-2011, 10:10 PM
A lot of sturm und drang over maybe ten bucks.

Sprinkus
09-03-2011, 11:10 PM
Screw posts is why my post count is so low. :cry:

1idejim
09-04-2011, 11:26 AM
Screw posts is why my post count is so low. :cry:

:laugh::laugh::laugh::laugh::laugh::laugh::laugh::laugh: