PDA

View Full Version : Help with front weights on Z500 60" with DFS


Lawn Details
10-23-2011, 11:08 PM
Hello all,
I am hopeful someone has the specs for the weights for the DFS bagger system on a Toro Z500 with 60" and 27 HP air cooled.

Thanks!

TLS
10-23-2011, 11:18 PM
What kind of specs?
Posted via Mobile Device

Lawn Details
10-23-2011, 11:31 PM
What kind of specs?
Posted via Mobile Device

Just the actual weight. Bought a system from another LCO, but no weights included. Some hot rolled and u-bolts should do it, but I want to ensure I have it right. That DFS weighs a ton.

TLS
10-23-2011, 11:39 PM
I had an UV on my Lazer. It had cast iron weights that went over top of the casters. Probably 40-50 lbs each. Then it had additional weights bolted under the front of the foot plate.

Don't know what hot rolled is though?
Posted via Mobile Device

Lawn Details
10-24-2011, 07:51 AM
I had an UV on my Lazer. It had cast iron weights that went over top of the casters. Probably 40-50 lbs each. Then it had additional weights bolted under the front of the foot plate.

Don't know what hot rolled is though?
Posted via Mobile Device

Hot rolled steel. A little less density than cast iron, but it's the total mass that counts.

The instructions show just the caster weights for the Toro. It looks like the air cooled 60" gets the "base" weight, while the LC and 52" get some additional stacked on top.

Thanks.

TLS
10-24-2011, 11:20 AM
Not sure if this helps any....

http://www.exmark.com/pdfs/109-1159.pdf