View Full Version : Redmax EBZ 7001 blower carb
I have a redmax EBZ 7001 works great. The only trouble i been haveing is the carb mount screws keep backing out. I have tried blue lock tite should i try red? Also the intake gets realy oily is this normal? It going though intake gaskets about a set a year
12-16-2011, 09:28 PM
You may want to consider replacing the isoblock, gaskets and carb retaining screws. The screws as well as the nuts embedded in the isoblock may have some wear on them from vibration. When reassembling, use blue loctite. Check to see how loose the screws are when turned into the isoblock.
Just to be sure we are on the same page its the two long screws that hold the carb on those are what losen them selfs
12-17-2011, 03:54 PM
Same page. The long screws that retain the air horn and carb screw into two nuts cast into the isoblock. Turn them into the isoblock with the carb off and check for looseness then make a determination. If they are continually loosening on their own, it seems fairly obvious that there has to be some wear, either in the carb retaining screws, the embedded nut or possibly both.
Thanks for the help ill check into it
vBulletin® v3.8.6, Copyright ©2000-2014, Jelsoft Enterprises Ltd.