View Full Version : MTD 10hp snowblower belt slipping
12-29-2011, 11:39 AM
Guy wants to sell me an older 10hp MTD snowblower for $100. He bought it this past summer and supposedly had it serviced at a dealer. He says he used it once and now the belt is slipping and doesn't have the room to fix it :rolleyes: Supposedly runs great, older model, 10hp, 26" cut electric start. Should this only need a new belt if it's not engaging? I wouldn't mind buying this, fixing it and either selling it or replacing my 8hp MTD that it's housing is rotting out. Thanks for your input
12-29-2011, 12:20 PM
The belt engagement is accomplished by a cable to an idler arm. If the cable is non adjustable you will likely find one or more holes in the idler arm that will permit moving the idler closer to the belt, thereby increasing tension on the belt upon engagement. Thats the best I can offer without some model numbers/date of manufacture.
12-29-2011, 12:39 PM
ok, worst case scenario what do you think it would need for parts? or more importantly is it worth the $100? he gave a model number but i dont think it is correct because i cant find anything on it 36845 500
12-29-2011, 05:27 PM
he says the model number is the 36845500 and serial number 092162 i will upload the pics he sent me in a minute
12-29-2011, 05:30 PM
looking to pull the trigger on this tomorrow if anyone has any input on if its worth it or not.
12-29-2011, 09:26 PM
Is the belt an OEM belt of or a "will fit" belt from the auto parts store? The MTD belts are odd ball sizes and the will fit belts only come in whole inch sizes. If you use a will fit belt of lets say 30 inches and the OEM belt is listed as 29 3/4 inches that 1/4 inch can mean all the difference in the world. I have seen that happen so many times I have lost count.
12-30-2011, 02:06 AM
that unit is very old ,its worth $100.00 in good working order at best where I live .
vBulletin® v3.8.6, Copyright ©2000-2014, Jelsoft Enterprises Ltd.