Stihl BR 400 Gas Cap

[hammmerhead]

My cap is starting to spit fuel out the two small vent holes in the cap. I pulled it apart and it there was no trash visible. Im assuming that high density fiber filter in the center is saturated and causing the issue.

Is there an updated cap for this old blower?

Thanks guys

[MrOPEguy]

My cap is starting to spit fuel out the two small vent holes in the cap. I pulled it apart and it there was no trash visible. Im assuming that high density fiber filter in the center is saturated and causing the issue.

Is there an updated cap for this old blower?

Thanks guys

Yes there is depending on your serial. Here's a bulletin.