View Full Version : Bobcat

01-14-2012, 10:37 PM
Hello, Well 2 questions for the group. 1. What are the specs for the 5 screws that hold the recoil starter cover on the 15hp kohler? PO lost all of them!
2. Rebuilt the peerless trans as the input needle bearings were toast, Add the benotite grease before putting halves together or add it after? 700 series trans.

01-16-2012, 10:11 PM
Well seems as I didn't get any input here is the answers. Screws are a 10-32 and fill the case up first then clean area around seal and use loctite gasket stuff. All good just rebuilt my peerless and works great. Better than 200.00 dollar new one.