View Full Version : Exmark Model #, Parts Manual

01-27-2012, 08:05 PM
Can anyone help with a model # and parts manual for this machine? I've checked the Exmark website, but their serial #'s don't go back as far as this one does (SR# 50462). Does it even have a sub-name? (Viking, Metro, etc.) I believe this is an early 1990 there abouts.

I know I can look up the parts here:


I just need a model #

Thank you.

piston slapper
01-27-2012, 08:23 PM
That mower looks brand new. Not bad for 20 years old.
Contact an exmark dealer. The serial # should be all you need , as Exmark has never re used a serial #
The serial numbers are assigned as they come off the line regardless of which line they come off.
Posted via Mobile Device

01-27-2012, 09:47 PM
Thanks piston slapper. I'll try to email them and see what happens. I tried it with the Bobcat (got one of those too), but never heard back.
I'll give it a shot and see what happens.

01-27-2012, 10:52 PM
I tried doing a little research and I see that the Standard Five Speeds end at SN 49,999 and some Viking Five Speeds starting in the 60,000 range. The 50,000 SN range seems to have found the black hole--either that or I missed it.

There is an Exmark customer service rep that posts on this site once in a while--maybe he'll see your post.

As Slapper indicated, a dealer should be able to help you out. I didn't look but you may be able to find a toll free customer service number on Exmark's website as well.

01-28-2012, 02:55 PM
Thanks dutch, I appreciate the time. I don't even think they named them back then. I too looked at the serial numbers and knew I was lost. Leave it to me to have a "black hole member", but hey it's been running and cutting pretty good!!!

01-28-2012, 03:14 PM
Can't you call Exmark and see what they can dig up?

01-28-2012, 03:53 PM
Can't you call Exmark and see what they can dig up?

I'm going to call them, (402) 223-6300, I doubt they're open on Saturday so I probably won't get somebody until Monday. I had done this once before with an older Bobcat, and when all else failed, I turned to LS. Needless to say, it was a much more pleasant and informative opportunity.
The knowledge on here by some of it's members is oftentimes immeasurable.

01-28-2012, 05:12 PM
I'm thinking one of the members here is an Exmark rep. Don't think he's posted /replied to anything lately though.
Mayhaps he'll see your post.

01-28-2012, 05:20 PM
That would be nice if he did. This machine would make a great commercial for them!!