PDA

View Full Version : weight distribution


paramediclane
03-03-2012, 10:16 AM
history, i pull a 7x20 3 ton equipment hauler with 3 foot sides as my work trailer. 2 ztr mowers with all the trimmings. i pull with a lifted z71 suburban which is also my daily driver. I have the aftermarket airlift 100 system. i have had issues with the bags leaking twice in one year. i am considering a weight distribution hitch system for my truck. my question is....how hard, or pain in the butt will this be to attatch and unattatch on a regular basis? i do not have a didicated work truck so therefore i have to unhook from trailer pretty often.

watatrp
03-03-2012, 10:49 AM
It's not hard to do. It may add up to five minutes each time you hook up.

paramediclane
03-03-2012, 03:11 PM
great, i was thinking it would be a nightmare with as much hooking and unhooking as i do weekly. Any idea how bad turning radius will be affected?

watatrp
03-03-2012, 03:32 PM
When I used the weight distributing hitch, I was pulling a 32' travel trailer so I wasn't too worried about turning. I will warn you that it will do a lot of creaking and groaning when you turn. I always carried a large pipe wrench for putting the bars on and giving them the tension.