PDA

View Full Version : 14.5 Briggs ohv throttle linkage


hillbilly_lawnboy
03-22-2012, 03:17 PM
i need a pic or something. its an older yardman tractor my neighbor has. he tore the carb off and cant figure out the linkage to put it back on

Restrorob
03-22-2012, 05:49 PM
If this isn't it, post the model and type numbers off the valve cover.


http://i107.photobucket.com/albums/m314/Restrorob/Briggs/BriggsLThrottleControl.jpg

dutch1
03-22-2012, 06:01 PM
For your "closet mechanic" neighbor, a cellphone with a camera could have been his best friend but hindsight is 20/20.

Briggs parts break down will not be helpful. About your only hope is that a picture may be available in the MTD's online owners manual, but even that's a stretch. Beyond that a Briggs service manual may have something that can give you a few hints.

It's not brain surgery--should be only two cables, a throttle cable and a choke cable. Should not be difficult to determine what goes where.

dutch1
03-22-2012, 06:06 PM
Way to go Quick Draw Rob--my sentiments on the carb as well but I don't have the resources any longer.

hillbilly_lawnboy
03-22-2012, 06:33 PM
i thought i had it right. and indeed i did. its been a long time since ive had one of those in my shop. and i didnt even have a book on it. (lost almost everything in a shop fire in november)

piston slapper
03-22-2012, 07:32 PM
Way to go Quick Draw Rob--my sentiments on the carb as well but I don't have the resources any longer.

Dutch.....Its tough to outdraw ole Restrorob when he has his super computer mainframes humming....
Posted via Mobile Device

dutch1
03-22-2012, 07:53 PM
I think you right Slapper--I'm beginning to think he has a direct line to every server in the country.

Restrorob
03-22-2012, 08:44 PM
I'm beginning to think he has a direct line to every server in the country.


Server ???? I don't need no stink'n server !!!!



























http://i107.photobucket.com/albums/m314/Restrorob/Misc%202/ComputerRoom.jpg


http://www.xtremesystems.org/forums/images/smilies/rofl2.gif


I jus KNEEEWWW if I didn't draw quick good ole Dutch would squeeze his shot off first !

Oh Dutch, I made that pic up couple years ago for another post. Had I not stumbled across it LAST NIGHT look'n for something else, I'd been still look'n after YOU shot.

As it stands...... That's one up for Restro !!! http://www.ostfriesenpower.org/neues.htm/a084.gif