PDA

View Full Version : Employee Time Punch Clock?? Trailer mount?


cuttin-to-the-Max
04-01-2012, 10:14 PM
Ok well guys im looking to see what you use in terms of time/ punch clocks. The guys are Milking me for hours (well i cant really blame them) But its due to bad math, bad memory and just negligence. My shop is pretty much just a yard with a few enclosures so until i can move i plan to mount the punch clocks in both trailers. The guys only work out of one trailer so it wont be a problem.

Im looking for the most basic system i can find... I invision something where the guys punch IN their PIN or swipe their card into the system. Then punch OUT at the end of the day... Then when I can view the number of hours at the end of the week...

Anyone have a system like that or know of anything that will work?

grandview (2006)
04-01-2012, 10:28 PM
http://www.exaktime.com/lp/reality?ibp-adgroup=LP80&gclid=CIHH5NKBla8CFcJM4AodiQtgyg

cuttin-to-the-Max
04-01-2012, 10:45 PM
http://www.exaktime.com/lp/reality?ibp-adgroup=LP80&gclid=CIHH5NKBla8CFcJM4AodiQtgyg

Do you have the Phone enables "pocket clock???" If you dont mind me asking how much does that system run you.. I like that better than the whole system i have in mind! All the guys have phones Anyway!

grandview (2006)
04-01-2012, 10:49 PM
Just saw in a mag. There is one I think is called job lock.

PLS-Tx
04-01-2012, 11:37 PM
Just saw in a mag. There is one I think is called job lock.

I'm pretty sure that is the same as the one in the link. Looks like it would work, I think it's about $1k.

If you contact them they will pester you to death with calls, fax and emails.

Weekend cut easymoney
04-02-2012, 08:54 PM
Clip software can do it...scheduling as well...employees use smart phone to log onto website and clock in and out of all jobs...and you get a detail of their work hours at end of week-

cuttin-to-the-Max
04-02-2012, 09:01 PM
Anyone have a good app that DOESNT cost 400+ bucks!?????

grandview (2006)
04-02-2012, 09:04 PM
Re read it. How are they punching in now?

cuttin-to-the-Max
04-02-2012, 09:18 PM
Re read it. How are they punching in now?

pen paper.... daily
then i sit down at the end of the week and tally it up.

grandview (2006)
04-02-2012, 09:24 PM
http://www.amazon.com/Acroprint-010236000-Electric-Recorder-Imprints/dp/B000XSS042/ref=sr_1_7?ie=UTF8&qid=1333412610&sr=8-7

2ExploreTech
04-03-2012, 03:01 AM
If that one, or similar, from Grandview doesn't work, then go to local office supply store. They have a variety.

Here's one that is durable , kinda ugly too :) ==>http://www.officemax.com/office-supplies/warehouse-inventory-supplies/time-clocks/product-ARS19900?csId=2-69-4480-56-3-18280-13890-56-4480-4224-56-4480-1741-0-4

mslawn
04-03-2012, 07:57 AM
I use the Jobclocks by exactime. Have had them for over 5 years with no problems. Just a few updates here and there. I have a jobclock in each truck and it works great. Cost me over 2000.00 back then, but by far a great investment. If yolu are worried about keeping up with them during the day, I use fleetmatics tracking to keep up with them.