View Full Version : Stripe Kits
12-14-2002, 12:36 AM
Can anyone give me some advice on these kits. I love the stripes.
I have all Exmark equipment and they leave good stripes already. I've seen some of you guys with chaines and rollers what do you prefer. send pics if you have of both.
Envy Lawn Service
12-14-2002, 12:39 AM
Exmark makes a factory add-on stripper you can buy and install between the rear anti-scalp rollers.
12-14-2002, 12:47 AM
I will check it out.
12-14-2002, 01:28 AM
I would personally go with a roller. It gives a much more defined stripe then chains do. Just my 2 cents
12-14-2002, 02:36 AM
The eXmark rollers are pretty nice and they definately add striping quality. Also help prevent scalping even better than the regular anti-scalp wheels. It's expensive, but it bolts on in minutes, adjusts easily, and is very well made.
05-21-2003, 10:50 PM
I love the roller on my zhp-52. I am looking for aftermarket
roller I can fabricate to my 36" Stander. Anyon know where you can by roller assemblies?
05-21-2003, 11:05 PM
Here is a very good thread on parts to make a striping roller.
Rich's Lawn Care
05-21-2003, 11:16 PM
what size deck? they have them on ebay for the 52" and 60" decks
05-22-2003, 07:37 AM
If you're using a walkbehind, you already have the flap. Try inserting some threaded rod in the bottom with your drill and then snip it off at the end. This will give the flap some weight to help bend the grass over. I did it and it works great.
vBulletin® v3.8.6, Copyright ©2000-2014, Jelsoft Enterprises Ltd.