PDA

View Full Version : fixture search


INTEGRA Bespoke Lighting
05-06-2012, 02:59 PM
I have a need for a couple of natural brass / copper finished, flush mount, louvered "step lights". I would like to use the Coppermoon CM.835-NAT but that finish is no longer available. Do you know of other similar fixtures in the raw or natural finish?

http://www.coppermoon.com/products/deck_surface_step/cm-835.php

Richie@
05-06-2012, 03:21 PM
I have a need for a couple of natural brass / copper finished, flush mount, louvered "step lights". I would like to use the Coppermoon CM.835-NAT but that finish is no longer available. Do you know of other similar fixtures in the raw or natural finish?

http://www.coppermoon.com/products/deck_surface_step/cm-835.php

James,

I don't know it these are up your alley but here is a link I just found.

http://www.shopwiki.com/l/natural-brass-/-copper-finished-deck-light?sb=1

INTEGRA Bespoke Lighting
05-06-2012, 03:29 PM
Thanks for that. Not exactly what I am looking for. I really would like the same shape and form as the CM835 only in a natural brass finish.

Richie@
05-06-2012, 03:41 PM
No luck here today , but if you find that fixture please post it or pm it.

Thanks

INTEGRA Bespoke Lighting
05-06-2012, 03:50 PM
Yes I will. I still have not found one after 1.5 hours searching online. Everything is in the bronze finish. Not sure why they dropped the natural brass finish on this one fixture.

Richie@
05-06-2012, 03:58 PM
I'm seeing the same thing.

S&MLL
05-06-2012, 10:49 PM
James i have 3 in inventory if you find more elsewhere u can have these 3
Posted via Mobile Device

S&MLL
05-06-2012, 11:04 PM
Actually nevermind. They are patina-ed already
Posted via Mobile Device

LLC RI
05-07-2012, 09:09 AM
James,

Why can't you use raw brass and just let it weather naturally? What about letting it weather and then clear coating it? Have you asked Doug at Coppermoon if they can make you some in the finish you want?

If your base metal is what you want, I would imagine the desired finish could be had.

George

INTEGRA Bespoke Lighting
05-07-2012, 11:27 PM
George. That is what I am looking for... Raw or Natural Brass finish. I want it to patina over time. All of the factory 'bronze' finishes are too dark. Coppermoon has discontinued the natural brass finish for this fixture, but Doug has been very resourceful and helped me out by finding some old stock. This one is solved.

S&MLL
05-07-2012, 11:32 PM
George. That is what I am looking for... Raw or Natural Brass finish. I want it to patina over time. All of the factory 'bronze' finishes are too dark. Coppermoon has discontinued the natural brass finish for this fixture, but Doug has been very resourceful and helped me out by finding some old stock. This one is solved.



James what Led are you running in that tight space? Illumicare bipin doesn't fit last time i checked.

INTEGRA Bespoke Lighting
05-07-2012, 11:34 PM
I installed a couple of them last year using the G4 Side BiPin lamp. I will have to try out the new G4 19mm in these and see if they fit.