PDA

View Full Version : 481398 scag pulley 6.35 dia taperbore needed


weldondl
05-21-2012, 09:08 PM
STT61A-25CH (S/N 6710001-6719999)need deck drive pulley 481398 it is 6.35 dia taper bore this is the one that is on the spindle that drives the shaft that hooks to the gearbox on deck. yep I rebuilt the spindle and during re-instalation of pulley cranked it to far onto tapered bushing and snap,:cry: it split. learned something new today. lol so if anybody got a parted out scag tiger i could use the pulley off it.

DaveWB
05-21-2012, 09:33 PM
Check out surpluscenter.com they might have a pulley that size.

wahlturfcare
05-22-2012, 11:15 PM
i may have a couple spares available. But i know bearing shopes carry steel ones that wok with the sleeve.

Johnagain
05-23-2012, 03:22 AM
Just go to the scag dealer they are only $35-$40.