View Full Version : 52'' toro grandstand, 60'' dixie chopper
06-08-2012, 09:10 PM
looking for a 667 john deere. or a 61 scag vride
i have 2001 a 60'' dixie chopper 25hp kawasaki, homemade stripping kit, new battery, filters, plugs, oils, belts, 4 sets of blades, new rear tires in september and have the extra set of rear tires on rims, has around 900-1000 hours.
i have a 2009 toro grandstand 52'' 23hp kawasaki, homemade stripping kit, electric power chute blocker has 559 hours.
06-09-2012, 02:39 PM
06-09-2012, 09:34 PM
What's the stripe kit look like. Curious.
06-09-2012, 10:10 PM
on which mower?
06-09-2012, 10:49 PM
heres a picture of the dixie chopper stripe kit. there were 3 hole on each side of the frame so i used those holes and cut the rubber flap 2'' longer than the distance from the frame to the floor so it drags. i used a horse mat from tractor supply store for the rubber. its 3/4'' thick and heavy. and you can make 8 stripes pieces out of one mat. i used it for 3 months and dosent even show abit of wear yet and stripes great
06-10-2012, 10:25 PM
would take 4000 for toro without the power chute on it
06-11-2012, 12:53 AM
Thanks for the pic. I bought a grandstand and wanted something. No real tractor supply stores around me though
06-11-2012, 10:24 AM
Where you located?
Posted via Mobile Device
06-11-2012, 05:30 PM
new palestine in
but i work in castleton in, its 45minutes north from new pal. and can bring the mower there also.
06-11-2012, 08:48 PM
dixie chopper is sold
06-12-2012, 07:58 PM
bump for the toro
06-14-2012, 12:40 AM
bump bump bump
06-16-2012, 04:35 PM
sold tor grandstand. please end this post
vBulletin® v3.8.6, Copyright ©2000-2013, Jelsoft Enterprises Ltd.