PDA

View Full Version : how do you program hunter node?


grass disaster
07-08-2012, 11:08 AM
my client has new sod and i cant get on it to cut it because there is standing water.

i took a look at the control and i cant get it figured out.

irrig8r
07-08-2012, 11:25 AM
my client has new sod and i cant get on it to cut it because there is standing water.

i took a look at the control and i cant get it figured out.

Look at the owner's manual. I've never used it and don't know how it's different than the SVC. I still have a lot of SVCs in the field.

http://www.hunterindustries.com/media/1919

grass disaster
07-08-2012, 01:22 PM
That will work. Thanks.
Posted via Mobile Device

HunterTekGeek
07-09-2012, 01:16 AM
Here is a link to the owner's manual: http://www.hunterindustries.com/sites/default/files/OM_NODE_dom.pdf

If you know how to Program a Hunter Pro-C then you know how to program a NODE. Unlike the SVC, the NODE has Programs A/B/C, 4 Start Times each, and Weekdays/Odd-Even/Interval water days. In other words, it programs like most standard controllers on the market.

Example: Program A - 6:00 AM Start with Mon/Wed/Fri water days. Set each station's run time in Program A and you are finished. NODE will run each station in sequence automatically. Unlike SVC, you DO NOT need a separate start time and water days for each station.

Call Hunter Tech Service at 1-800-733-2823 when you have it "in hand" and they can help you program it quickly. Hope this helps.