PDA

View Full Version : Dismiss


Alf1096
08-09-2012, 09:35 PM
I know the mixing rate but the question I have is what to you normally mix at. Do you start with the high rate and then go down until it does not work. Where is a good starting point. Thanks
Posted via Mobile Device

gregory
08-09-2012, 09:52 PM
i've used 6-8 oz per acre on SA. 6oz per acre works well..

Ric
08-09-2012, 10:19 PM
.

Don't use a surfactant with Dismiss if you use full rate.


.

Alf1096
08-09-2012, 10:30 PM
Was not going to use surfectant. Just wondering when trying a new chemical do you tend to mix closer to max or min rate.
Posted via Mobile Device

Peachtree Environmental
08-09-2012, 11:27 PM
When I've used Dismiss, it works fairly quickly. You should know within a couple of days if it's worked. I'd start at the low rate and work my way up.

gregory
08-10-2012, 05:38 PM
i agree i'd use the min and see what happens and adjust from there..

Ticolawnllc
08-11-2012, 10:02 PM
I started low and had no luck.

One was too low. The next two at full worked but green remained low in the stalk. So I cut and sprayed a 4th time. Whatever is left I'll have to get next year.

Man Killinga is hard to kill. The only saving grace is I got some pics.