PDA

View Full Version : 1.5" pumps and other parts for sale


mc25a
12-01-2012, 10:39 AM
I have some parts that would be good for a sealcoat machine. First off I have 3 ARO 1.5" double diaphram pumps (666150-889c) and some suction hose, valves, and fittings. The pumps are aluminum body with hytrel diaphrams. These were previously used for waste oil pumping so no real hard duty or abrasives. Tested and working fine. Here's a list of the other parts:

2 x 1.5" steel pipe unions
2 x 2" steel pipe unions
2 x 1.5" (~6') suction hose, threaded both ends,
2 x 2" 600psi wog full port bronze valves (watts regulator)
2 x 1" valves (steam rated, not sure of specs)
2 keystone filter housing htgb10 (probably not suited for sealcoat)
various other steel fittings, elbows, adapters, etc 1" to 2"

Looking for 400 each for the pumps, 1200 for everything plus shipping. Located near Roanoke, va