PDA

View Full Version : Wright Stander RH 52" Ignition Switch


MisterBreeze
12-15-2012, 09:20 AM
I turn the switch (key) to the off position and it takes 1-2 seconds to actually kill the engine. I changed out the switch and the problem continues. Any ideas?

BigFish
12-15-2012, 10:19 AM
Check the harness plugs. The mag kill wire is white. Also check the black ground wire at the plugs and at the eng block. Got a loose connection/terminal somewhere along the line.
Click on the Wright logo and then support. You should be able to download an owners manual that has a wire diagram.