PDA

View Full Version : Head bolt torque for fx921v


flipper61
12-29-2012, 07:26 PM
Can anybody tell me what the head bolt torque is on the fx921v Kawasaki engines or a site that lists the specs on them?

Thanks

BigFish
12-29-2012, 08:02 PM
It's 34 ft lb.
Ya gotta tighten in stages and in sequence.
Cyl. #1: Bolt 1 is lower right , B2 is upper left( above plug), B3 is lower left( across from B1), B4 is above B1 opposite plug, and finish with B5 (next to plug)

Cyl. #2: B1 lower left, B2 upper right, B3 lower right, B4 is above B1 opposite plug, B5 next to plug.

flipper61
12-29-2012, 08:33 PM
It's 34 ft lb.
Ya gotta tighten in stages and in sequence.
Cyl. #1: Bolt 1 is lower right , B2 is upper left( above plug), B3 is lower left( across from B1), B4 is above B1 opposite plug, and finish with B5 (next to plug)

Cyl. #2: B1 lower left, B2 upper right, B3 lower right, B4 is above B1 opposite plug, B5 next to plug.

Thanks, I appreciate it.