PDA

View Full Version : Installing a OCDC


scott1974
01-03-2013, 09:06 PM
Wondering if anyone has installed a factory OCDC on a Dixie Chopper Magnum mower. The Magnum came with a conventional side discharge chute that I'm wanting to replace. I have the OCDC and everything seems to match up, but I am having problems removing side chute. I have unbolted everything, but still won't move. Besides a sledgehammer, anyone have any ideas?

Thanks,
Scott

Restrorob
01-03-2013, 10:35 PM
Besides a sledgehammer, anyone have any ideas?



Nope, If you have all the bolts/screws out it should fall right off.

Did you buy it new ?

What model (engine size and deck) and serial number ?

scott1974
01-04-2013, 07:31 AM
Yes, bought it new. It is a DC Magnum with a 50" deck and KW engine.

Restrorob
01-04-2013, 08:05 AM
What model (engine size and deck) and serial number ?


Serial denotes year built.......

scott1974
01-04-2013, 02:08 PM
It begins with a 12, so it is a 2012 model.

Restrorob
01-05-2013, 04:35 PM
Scott,

I've got the same unit at the shop but came with the OCDC installed, I'm not sure what the issue is but as mentioned the deflector should have just dropped off ?