PDA

View Full Version : G6 blades for a Lazer Z


Blasko's Lawncare
01-25-2013, 11:22 AM
Hi, I just purchased an Lazer Z and looking to find the g6's because I've heard a lot of good about them. If anybody has other suggestions of blade type im all ears. I mow in Eastern PA so trying to prevent double cutting is HUGE. I've been looking for the last couple days and cant find the ones for my machine, any help is greatly appreciated. :waving:
Model Number:LZX27KC606

Blasko's Lawncare
01-26-2013, 10:55 PM
Bump, anybody's response is greatly appreciated!

Blasko's Lawncare
01-26-2013, 11:05 PM
Here's a pic of my new mower

Schrock Lawns
01-27-2013, 02:26 AM
Jack small engine I think might have them theirs sponsors on this site who might have them also try ebay
Posted via Mobile Device

Richard Martin
01-27-2013, 07:42 AM
Measure your current blade and post the measurements here. Measure the center hole size and from sharpened blade tip to sharpened blade tip. I'm thinking it should be a 20.5" blade with a .625" (5/8") center hole.

weaver
01-27-2013, 09:47 AM
Measure your current blade and post the measurements here. Measure the center hole size and from sharpened blade tip to sharpened blade tip. I'm thinking it should be a 20.5" blade with a .625" (5/8") center hole.

Newer Lazer's have a 15/16 in center hole...

weaver
01-27-2013, 09:51 AM
Hi, I just purchased an Lazer Z and looking to find the g6's because I've heard a lot of good about them. If anybody has other suggestions of blade type im all ears. I mow in Eastern PA so trying to prevent double cutting is HUGE. I've been looking for the last couple days and cant find the ones for my machine, any help is greatly appreciated. :waving:
Model Number:LZX27KC606

I just used the Exmark # and typed it in Ebay's search engine and here's what they have...


http://www.ebay.com/sch/i.html?_trksid=p5197.m570.l1313&_nkw=103-6398&_sacat=0&_from=R40

Blasko's Lawncare
01-27-2013, 10:26 AM
Thanks for the help so far guys and I found these http://www.ebay.com/itm/3-EXMARK-103-8244-103-8396-OREGON-392-201-GATOR-MULCHER-G6-BLADES-3-/190789785053?pt=LH_DefaultDomain_0&hash=item2c6bf515dd Now how do I go about getting the blade number, those seem like the right ones but i just wanna make sure,im gonna go out and measure the blade but i don't wanna take it off to get the center hole measurement.

weaver
01-27-2013, 10:35 AM
Thanks for the help so far guys and I found these http://www.ebay.com/itm/3-EXMARK-103-8244-103-8396-OREGON-392-201-GATOR-MULCHER-G6-BLADES-3-/190789785053?pt=LH_DefaultDomain_0&hash=item2c6bf515dd Now how do I go about getting the blade number, those seem like the right ones but i just wanna make sure,im gonna go out and measure the blade but i don't wanna take it off to get the center hole measurement.

Those will fit.. newer lazers have 15/16 in center and that's the correct length also... Go to exmark.com quick refrence parts and cross #s....
Posted via Mobile Device

Blasko's Lawncare
01-27-2013, 11:18 AM
Ok so I found the blade number and there aren't any G6's made that match up with it,the difference is the g6's are 20 3/4 while the ones I need are the 20.5 and my next and final question is whats the difference between the normal gators and the g6's, are the gators worth it?

weaver
01-27-2013, 04:16 PM
Ok so I found the blade number and there aren't any G6's made that match up with it,the difference is the g6's are 20 3/4 while the ones I need are the 20.5 and my next and final question is whats the difference between the normal gators and the g6's, are the gators worth it?

I sent u a Ebay link for blades that will fit your mower. All you got to do is get part # for blades you want and find them on ebay. The ones i should you are oem blades from Exmark called extremes just like G6 blades...
Posted via Mobile Device

Blasko's Lawncare
01-27-2013, 05:12 PM
Ok thanks,really appreciate the help!

LandFakers
01-27-2013, 05:20 PM
I can't help you with the blades but the mower looks sweet! :laugh:

Blasko's Lawncare
01-28-2013, 11:24 AM
Haha tell me about it can't wait to mow with it COMEON SPRING!

944own
01-28-2013, 02:13 PM
I have the same mower and have not been able to find the g6's for it. I can confirm the center hole is 15/16

weaver
01-28-2013, 02:39 PM
I have the same mower and have not been able to find the g6's for it. I can confirm the center hole is 15/16

I just use the Extreme's by Exmark. You can get a set for like $40 on Ebay and they do work really well. But you are corect, i could'nt find G6's for mine also and went with the oem blade and i'm satisfied...

weaver
01-28-2013, 02:46 PM
Here is what they look like..

weaver
01-28-2013, 04:07 PM
Here is the G6 blades that will fit you guys 60in mowers if you don't like the Extremes...

http://www.ebay.com/itm/Oregon-392-201-Exmark-Gator-Mulcher-G6-Replacement-Lawn-Mower-Blade-20-3-4-Inch-/320968308583?pt=LH_DefaultDomain_0&hash=item4abb33b767

Blasko's Lawncare
01-28-2013, 04:50 PM
Thanks again weaver and since you guys have the same mower how was it before you put the blades on double cutting wise? I've heard some complaints about the series 6 not being anything great.

weaver
01-28-2013, 05:05 PM
Thanks again weaver and since you guys have the same mower how was it before you put the blades on double cutting wise? I've heard some complaints about the series 6 not being anything great.

I run a side discharge mulcher all season long and really no problem. I do have a few junk lawns (weeds) that looked nasty when i was finished. The blades just cut the weeds up so fine and it was wet when i did it, just looked not so good. I cut also in all conditions. But customers that have lawns like that usally don't complain about clumped weeds, if they do i just suggest a weed treatment. But if you have alot of lawns like that i would continue to run your high lift notched blades.. This is what has worked well for me...