View Full Version : hydroseeding
03-04-2003, 01:33 AM
How much is this worth?
A 1988 Bowie Hydro mulcher that is in excellent condition with a brand new paint job. It is a 800 gallon machine w/a 100 gallon flush system,rebuilt pump, gear pump, electric hose wind up, top cannon, and powered by a 4cyl winsconsin engine. It only has two thousand hours. Thanks for your input.
03-04-2003, 09:51 PM
skid, trailer or goosneck??
03-04-2003, 11:35 PM
Tandem Axle Trailer with pindle hitch.
Does anyone have a value for this machine??
03-05-2003, 05:33 PM
ARE YOU LQQKING TO BUY OR SELL IT.
It is work probobly 2,000-5,000
I would pay 2,000 for it aroun January 2004.
Otherwise I will be buying a Turbo Turf Hydroseeder.
100 gal $2,000 1,300 sq. ft coverage.
Will have to refill 3+ times each job
but will do
Hopefully will pay for the unit the first yr.
03-05-2003, 08:04 PM
we have this machine, older 1976 model. I paid $1000 for mine and paid another 1500 or so to rebuild the engine, carburator, pump, replace the top and chains. it gets a rhino liner next job, hose reel and clean out tank job after that. mine has no turret, I'd say yours is worth 3-8000, depending on rust, tires, inside of tank, etc. I have seen several in the equipment trailer, a magazine with photo ads sometimes sold near the truck trader or auto trader magazines. they average 4-8000. good luck.
you should also know that the Victor 800 actually has a capacity of 950 gallons.
03-05-2003, 10:32 PM
I agree with David. Depending on the rust and if it was sandblasted before the painting I would guess around here you would get about $7K-$9K .
03-08-2003, 11:30 AM
thanks guys for your input
It has no rust on the outside, but there is a little spot 1" that need to be looked at. It still has the factory coating inside.
Hey Dave what's a turret
03-09-2003, 01:40 PM
Are you trying to sale this machine or buy?
Also, a turret is the gun on the top that allows you to spray standing on the machine.
03-10-2003, 11:51 AM
It does have a turret gun on the deck. I am pondering selling the machine. I was thinking on purchasing a turbo jet machine. Alot less maintance.
What do you think Guys
It takes quite abit of square feet to fire up my machine
vBulletin® v3.8.6, Copyright ©2000-2016, Jelsoft Enterprises Ltd.