PDA

View Full Version : Digging under sidewalks.


Lombardi
04-05-2003, 01:34 PM
For those of you that install landscape lighting, what are some methods used to get the wiring under sidewalks or drives?
Thank you for any responses.

LawnsRUsInc.
04-05-2003, 02:37 PM
I would always start by digging a hole on both sides and then with a hose with a metal tip that connects to the fitting. Its hard to describe i made my end my self with things from the hardware store.
Jason

scott185
04-05-2003, 03:26 PM
Use either a horizontal drill (rent) or a piece of 1/2 conduit attached to a water hose

Mykster
04-06-2003, 12:56 AM
Originally posted by scott185
or a piece of 1/2 conduit attached to a water hose


That's the same way I was shown when I worked for a plumbing contractor.

promower
04-08-2003, 01:32 AM
Rebar and a sledge hammer! have fun I did this once it sucked. Then again I used tools that cavemen invented

wojo23323
04-08-2003, 04:45 PM
I use a pressure washer. It's messy, but quick.

chipk1
04-09-2003, 09:38 PM
Dig a hole on both sides and hook a hose to 3/4 PVC and jet under walk.