View Full Version : low volume spray on ride-on
05-16-2003, 10:14 PM
To any perma-green ride-on users, are you still using the pint/M rate of the older units or have you gone up to the Qt/M volume? If you have do you see a significants in control or does the higher volume seem more hazardous being higher output?
05-17-2003, 01:21 AM
Mine is set up for 1 quart per K. It came from the factory that way. I don't see how you can get good control at a pint per K. I think that you need more than a pint per K to get good coverage. I think that is why they set up all the new PermaGreens to put down 1 quart per K.
05-17-2003, 09:57 AM
1 pint per 1000 is = to @ 5 gal per acre. Way too low
1 qt per 1000 is = to @ 10 gal per acre, and I've had sucess at this rate!
05-18-2003, 09:15 PM
Thanks for the input, I'm going to go up with the rate simply for that reason in geting better coverage. I know my old units at the lower rate have worked ok but with a highter volume I would expect a better penitration through the canopy to lower growing weeds. I was wondering if there was anyone that has used any surface insect controls with the higher rate as well.
05-19-2003, 12:35 AM
I got mine set at the 32oz per 1000 rate.
I am getting 75% to 99% kills, however it veries from lawn to lawn, and grass height.
I have been doing my neighbors apps also, "mr hose jocky", and he thinks it's still to low. he wants 100% all the time.
I am happy with the 75% +, I can get any left over on round #3.
vBulletin® v3.8.6, Copyright ©2000-2015, Jelsoft Enterprises Ltd.