kennyg
05-20-2003, 10:40 PM
Due to all the great reviews on this site, I went ahead and bought the 32" Pro G last year and love it. But with some time under its belt I have come to the conclusion that it doesn't stripe all that great. I am cutting Kentucky Blue at 3" and the back of the deck is 1/4" higher than the front on cement surface.
I've read that Gravely has a striping flap that attaches to the deck. Has anyone with the 32" tried out the stripe kit? If so, how are the results?
I also know that a roller would ultimately provide better striping and have reviewed the site (especially Dwost's theads: great stripes Dwost!!!) for roller installation recommendations but can't figure out how I would rig it up on the 32" pro G due to the small offset deck design. Anyone manage to install a roller onthe 32" ProG? Any pics?
Thanks in advance for any replys/recommendations.
I've read that Gravely has a striping flap that attaches to the deck. Has anyone with the 32" tried out the stripe kit? If so, how are the results?
I also know that a roller would ultimately provide better striping and have reviewed the site (especially Dwost's theads: great stripes Dwost!!!) for roller installation recommendations but can't figure out how I would rig it up on the 32" pro G due to the small offset deck design. Anyone manage to install a roller onthe 32" ProG? Any pics?
Thanks in advance for any replys/recommendations.