PDA

View Full Version : dump trailer sides


Bill Davis
06-06-2003, 09:39 AM
I just purchased a new 6x10 dump trailer with stake pockets. The trailer has two foot metal sides already but I would like to be able to haul leaves and other light materials such as branches and mulch. I just need some pictures and descriptions of how to build these sides from yall. Any help would be appreciated. Thanks, Bill.

cat320
06-06-2003, 08:20 PM
Bill what i would do is get pressure treated 2X6's notch it to fit the 2X4 pockets.That way you have more board for the plywood to addhere to then what i did was cut 2 4X8 sheets of 1/2 " in half that gives you another 24" which is just right to haul mulch .

AltaLawnCare
06-07-2003, 12:42 PM
Heres mine with 8 Cuyrds of Mulch. I used all 2x4s , with a plywood gate.

AltaLawnCare
06-07-2003, 01:30 PM
Heres mine, with 8 CuYrds of Mulch. I used all 2x4s with a plywod swing away gate: ;)

Bill Davis
06-14-2003, 04:33 PM
does your trailer have a barn door type rear gate or does it just fold out. Can you give me any closer of a pic. of the trailer. Thanks

cat320
06-14-2003, 07:17 PM
that looks like a regular gat in the pic I have barn doors on mine.

AltaLawnCare
06-15-2003, 12:16 PM
The whole gate swings away, and latches to the side, to be out of the way.

;)