PDA

View Full Version : 1st gen 2wd Cummins - can I lift it???


A1 Grass
08-30-2003, 09:15 PM
I have a '92 Cummins LE 2wd. I HATE the nose-down configuration of the Dodge. I bought a 2wd for the mileage, but I crave the look of a 4wd, even though I would rarely go off-road.

Has anyone leveled (or even better) lifted their 2wd? I have heard that the Daystar coil spacers for the '94's are the same diameter and will work on the '92.

Any thoughts????

Randy J
08-30-2003, 11:42 PM
Buy a 4X4. With a Cummins the mileage will still be great!

Randy

A1 Grass
08-31-2003, 12:01 AM
Originally posted by Randy J
Buy a 4X4. With a Cummins the mileage will still be great!


Not an option at this time, plus if I were going to sell it I would be inclined to get an older model Power Stroke 4x4.

I'd at least like to get it level....

LawnSmith
08-31-2003, 12:15 AM
trucks sit tail high for a reason, its to compensate for load. if you jack the front end up you are asking for trouble w/ a moderate load.

Gravel Rat
08-31-2003, 12:45 AM
If the truck has spring blocks in the rear you can remove them trying to lift the front won't work with the A arm set up Dodge uses.

I agree with Randy if you want the look of 4 wheeldrive get a 4 wheel drive or just live with the low riding nose down look.

Good Luck