PDA

View Full Version : Catchers For Lazers


DieselDeere
10-26-2003, 10:15 PM
What baggers are available for a eXmark Lazer Z 52" Ultra Cut deck? How much are they? Are their some sort of screens available to further filter dust? How much?

PeterA
10-27-2003, 02:14 PM
Diesel,
you can use part number GCEXXL (the 6.2 cu ft) or the GCEX (the 4.15 cu ft). List is 329.00 for the GCEX and 459.00 for the jumbo. We do have a dust cover for both. The part number is GCDust or GCDustXL. They come in 4 parts and attach to the outside of the bagger using small machine screws. Cost is 50-65 bucks depending on the dealer and what size you need.
Since you have an ultra cut deck, I would reccomend you get the 2004 model Accelerator. The distributor in Michigan (PACE) just got a bunch of these in, both in the Jumbo and regular sizes. The opening is 3/8 inch taller to optimize the fit on the Ultra cut but still retain the fit on the other exmark decks. The box is marked "Extender Ready". Ask your dealer to have pace send a unit with this marking and the performance will be slightly better than with the 2003 model catcher.

Thanks
Peter

DieselDeere
10-27-2003, 04:04 PM
How much do each of the 04' baggers weigh?

DieselDeere
10-27-2003, 04:08 PM
Also how does the back door open? How large is the back door opening of each?

PeterA
10-27-2003, 05:20 PM
The 04's are between 17 and 18 Lbs. for the standard, and 23-24 Lbs. for the Jumbo. The catcher empties out the back by means of a pivoting door. The door can be removed by bringing it to the vertical position and pulling it off (for emptying into buckets or over the side of a trailer).

Peter.

DieselDeere
10-28-2003, 06:06 PM
Originally posted by PeterA
Diesel,
The distributor in Michigan (PACE) just got a bunch of these in, both in the Jumbo and regular sizes. Thanks
Peter

Never heard of Pace, do you have a phone #?

PeterA
10-28-2003, 11:33 PM
Diesel,
The phone number for Pace is 734-453-6258. They can help you find a dealer, but will not sell to landscapers. They set up our dealers for us and keep an inventory on hand in Michigan so dealers have quick access to them. I mentioned them because your dealer may need to order one from them.

DieselDeere
10-30-2003, 10:09 PM
How large is the opening of the back door?

PeterA
10-31-2003, 10:37 PM
The regular size is about 16*16 inches, the XL about 18*18

Peter.

PeterA
10-31-2003, 10:43 PM
Diesel,
Looking at some of your other posts, you may be thinking about putting a garbage bag over the back. Add about 1 1/2 inches to the above measurements to get the outside dimensions. there is a 3/4 angle bar frame around the back door.

Peter.

DieselDeere
11-01-2003, 07:54 PM
Originally posted by PeterA
Diesel,
Looking at some of your other posts, you may be thinking about putting a garbage bag over the back. Add about 1 1/2 inches to the above measurements to get the outside dimensions. there is a 3/4 angle bar frame around the back door.

Peter.

Yes, I am thanks for the suggestion. I plan to buy this also http://www.choiceproductsinc.com/trashfunnel.html