View Full Version : thinking about new zero turn 48"or 52"
Jarred's Lawn Care
10-27-2003, 12:08 AM
best mower for your money either 48"or 52". Been looking at exmark, toro, dixion, dixie chopper, and trying to find some info on hustler any help would be great.
10-27-2003, 12:29 AM
Jarred, IM not trying to be rude but im going t owrite what everyone else is thinking, please use the search button, you will be able to read for days on that subject!, p.s. go with the Exmark!! :D
10-27-2003, 12:31 AM
and i will start to use the spell check :)
10-27-2003, 06:22 AM
LAZER HP make sure you look at the 04's. This is an 03.
Oh go 52"
10-27-2003, 07:40 AM
Ditto on what John said ^^^^^
Check the trim side overhang on the 48 vs the 52 I believe you'll find the 52" to be more desirable.
10-27-2003, 09:02 AM
TLC9: Please do not write or think for me. Jarred buy as large as you can use,demo,demo,demo and buy what works for you.
10-27-2003, 09:20 AM
Definitely go with the 52". I had been using a Walker with 48" and when I bought my LXHP I thought 48" was the ideal size for the accounts I have. Because side trim overhang is critical on a mid mount (not so with the front mount Walker), I really wish I had gone with the 52" Exmark versus the 48".
10-27-2003, 09:22 AM
Sorry.....meant to say LZHP in my previous post.....
10-27-2003, 01:46 PM
Don't have a ZTR but make sure you look at Scag.
10-27-2003, 08:30 PM
Larry, Uh, What Jarred asked was a general question, a very general question, I have seen other critisize for asking such a question when there is a search function, No need to get you undies in a bundle, I didn't mean to think, act, talk, or offend anybody. Sorry. If you meant thinking for you when I said get an exmark, well, Jarred, GET THE EXMARK! I did infact drive everythind, Scag & Gravely (bad dealer), Hustler & JD (bad dealer) Exmark and DC dealer=wonderful. All the wonderful comments I read about Exmark and Exmark's Service history is why i bought. And yes I should have just put down try them all, Good Luck with your search Jarred, and Sorry if anyone took offense.
Jarred's Lawn Care
10-27-2003, 08:46 PM
thanks i'm still pretty new at this guys got to bare with me until i get going on this, thanks for all the help though. Is the vac for the exmark a good purchase?
10-27-2003, 09:02 PM
I was set on buying a 44", when I demoed a 52" I realized how nice it is to have overhang for getting close to objects. if you can get a 52" where your working go w/a 52" but demo and buy what works best for you.
10-28-2003, 12:20 AM
Jarred, I ended up buying the ultra-vac with my lazer hp (52). One of the best purchases, even tought I mainly use it for spring/ fall cleanups and dethatching its a must. works very well, and only takes a minute to take on and off!. hope that helps. I think i got mine for 1,500 when I bought my new 03 for like 7,800. Just to give you some price examples.
10-29-2003, 03:09 PM
Well I like my 48' HP
I'd get at least a 52"er. otherwise you might as well get a W/B. And like the other guys said, your trimming side will be greater with a larger deck.
vBulletin® v3.8.6, Copyright ©2000-2014, Jelsoft Enterprises Ltd.