PDA

View Full Version : Catcher didnt work for my mower


NCSULandscaper
11-10-2003, 11:07 PM
Peter,
I emailed you not long ago about the catcher for my Toro Z. I think the dealer that i bought it from also contacted you about the fit of the catcher to the SFS deck. The openings on the catcher was way too small for the opening on the deck and the rear of the catcher was hitting the rear tires. The dealer did tell me you called them back and appologized about the fit and i thank you for looking at all the possibilities to fix the problem, but i did send the catcher back until a model comes out to properly fit my mower. Thanks for your time.

Matt

PeterA
11-12-2003, 10:06 PM
Matt,
I spoke to your dealer and it sounds like you have a different type of deck than what we refer to as a "SFS" deck. The newer SFS decks are heavy welded steel construction with a 3/8 steel rim around the discharge. There is a distictive "notch" at the front of the rim. In speaking to your dealer, it sounds like you have the stamped sheet metal construction deck, which to my knowledge is not being used on their commercial mowers anymore. Give me a call sometime and I will see if we can come up with something for your mower.

Thanks
Peter.