Trailer Pics

[aperfectlawn]

Please post pics of your trailer. I am trying to get ideas for myself.
Thanks.

[PaulJ]

Here's my 5x8 with a 36" and 21" mowers. Good fit, but not much extra room.

[PaulJ]

Here's the same trailer with my new 48" SWB. Now the 21" has to go on the back and has to ocme off every time i want to take the 48" off. I now try to scedule so I only have to carry the 21" one day a week.
I'm looking for a bigger trailer this winter.

[pottstim]

Here is a pic of my 6 1/2 x 10 that I purchased back in June. I paid $750 for it. It has the tubular steel frame. In the near future, I want to add a trimmer rack. For now, I just put my BP blower and trimmer in the pickup bed and bungee them down. The push mower and Toro Walkbehind go on the trailer. So far, I am very pleased with the trailer. It was made by a local manufacturer. The only problem I had was he hardly shot any paint on the parts that are not so visible to the eye unless you bend down and look. I just took care of that problem recently with some black rustoleum paint.

[Mr_Marc]

Originally posted by PaulJ
Here's my 5x8 with a 36" and 21" mowers. Good fit, but not much extra room.

Is that a AMMO can mounted on the left rail and fender?

[Frosty_03]

Hey aperfectlawn here is my rig I hope it helps. It is a 62" x 14' tandem axle electric brake trailer. I have installed the Jungle Jim Gear Caddy package. I paid 7 bills for the trailer and another 3bills for the Gear caddy. I mounted everything on the curb side of the trailer. I un a 48 " emark metro floating deck and a 44"lazer Z. I also carry a 22" cut craftsman for tight trimming or for those yards that have a small entry for the back yard. Well Any awy I hop this helps.

[Frosty_03]

OOPS here is the PIC

[Frosty_03]

LETS TRY AGAIN

[GLS]

Here's my setup. I'm gonna have to get a bigger trailer soon. I would like to get an 8.5' x 16' or 18' enclosed.

It is a 6x12 with trimmer trap, tongue box, and solid sides. Here is what I cram on it:

60" ztr
36" walk-behind
21" pusher
2 backpack blowers
1 handheld blower
1 hedge trimmer
1 stick edger
2 string trimmers
5 gal gas can
2.5 gal mixed gas can
baggers on all mowers
Misc parts/tools in tongue box

Will be adding brakes to it soon

[PaulJ]

Originally posted by Mr_Marc
Is that a AMMO can mounted on the left rail and fender?

It sure is. Makes a good tool box for trimmer line, mulch plug for the 21", hand pruners, etc..
I think it's the 20mm size. cost about $10.

[grassrootsinab]

Hey 0ryan0,

What model of JD 21" is that? I run the JS 63 and have had good luck with them but am thinking of going to a heavier model next spring.

[GLS]

Jeff - the 21" is a JX 75. I bought it new 3 years ago. No major problems so far. I have added a few parts from the commercial model (jx85, no longer in production:mad: )such as height adj. reinforcement plates. I figured i'd need to add the steel wheels, but I havn't had a plastic one break on me yet. Only things i've had to replace is a little plastic chute under deck that came loose and got chewed up, and the throttle and gear cables.

If you like your JS63, I think you'll love the JX75. Kawasaki engine, 5 speed, blade clutch, aluminum deck (which some people think arn't so great, but I havn't had any problems with mine, yet).

Sorry I just now realized how long my post was:)

[imograss]

heres a pic. of the trailer me and a buddy of mine built (I mostly watched)The trailer if for me, it's very heavy built, 18', 8'gate, brakes on both axles, gas can box on left side by fender, diamond plate steps on corners of fenders, racks that hold a total of 6 trimmers, 3 blower racks, and the huge storage box on the front that can double as a casket:rolleyes:
Tim

[walker-talker]

Here's my 6.5' X 16" PJ Trailer. Going to build tool box and gas can racks for it soon after Christmas.

[Mr_Marc]

I thought I'd share my enclosed picks

[Mr_Marc]

Inside

[precisioncut]

HERE YA GO

[precisioncut]

wrong one-here ya go

[precisioncut]

By the way-the trailer is 5'x10' BigTex Utility. I built the partial sides and shelf for gas cans out of wood and painted them to match. Going to add a trimmer rack this winter and a place to hold a ladder. Good luck to ya.