Anyone Know How....

[MCS Lawn Care]

hi guys i just got a used 60 inch dixie chopper? does anyone know how to even the handles, it seems that the two are a little off from each other(the left one engages prior to the right) which is no bug deal just a little annoying..............


chris

[MCS Lawn Care]

?

[Doc Pete]

Originally posted by MCS Lawn Care
hi guys i just got a used 60 inch dixie chopper? does anyone know how to even the handles, it seems that the two are a little off from each other(the left one engages prior to the right) which is no bug deal just a little annoying..............


chris

I'm sure Larry at "Hillsboro lawn and garden", in Hillsboro could help you. The handle/handled Dixies.
Pete

[PLI1]

check to make sure one of the handles isn't bent.

[Pecker]

I know nothing about D/C's, but my JD 757 ztr has two bolts at the bottom of the yokes you can loosen. Then you just set them where you want 'em and hold it while you tighten it back up. If there are no similar bolts on your, you might be able to adjust the linkages going to the pumps. Hope this helps.

[MCS Lawn Care]

thank you for all the help too cold to check now will do when it gets warmer.


chris

[BW4486]

if you lift the seat im pretty theres 2 screws on the hydro pump u can adjust

[BW4486]

IF you lift the seat im pretty (sure) theres 2.......