PDA

View Full Version : help with fert price


osc
10-29-2000, 10:11 AM
12 acre soccer field complex. Fall fert 34-3-8 with liquid app of trimec. I'm calculating $1,290.00 at 2.50 per thousand square feet. Most of my fert accounts are smaller than this so I wanted a price check. Thanks!

ant
10-29-2000, 10:36 AM
are you spraying <b>whole</b> 12 ac.?
how are you applicating the fert.?
how many pounds of<b> N </b>per <b> M </b>
anthony

[Edited by anthony on 10-29-2000 at 03:39 PM]

osc
10-30-2000, 08:26 AM
Dry granular fert 34-3-8, I have enough bags in the barn to do it. Haven't calculated how much N that is. That's the whole 12 acres. 43k sq ft in 1 acre X 12 = 516k sq ft X $2.50 = $1,290.00. Am I close?

osc
10-30-2000, 06:29 PM
Sorry, that's 1lb of N per m.

ant
10-30-2000, 07:50 PM
34-3-8 at a cost of 10.00 per bag + -
@2.9 lb/1000 sf,cost= .58 cents per m
.58 times 43= 24.94/per ac.
24.94 /ac times 12 = 299.28 per 12 ac. (matt. only)


trimec= is it classic? whats the cost? (i don't wont to sound like a pickel but you need to be more clear)
classic=23.00/gal.
.18 cents/oz.
rate= 1.5 oz/1000 sf
cost=.27 cents /1000 sf
.27 times 43 = 11.61/ac
11.61 times 12 = 139.00 matt

total matt=438.28 or 1.18/m

are you going to apply the fert then spray the trimec?
i use a ride-on spreader/sprayer i need to find out the time it will take to do 12 ac. (never done anything that big in one application)

<B>lazer can you help?<b/>
anthony

osc
10-30-2000, 09:10 PM
First of all, let me say that the amount of nitrogen is not needed here because the rate of product is given on the label rather than trying to use the active ingredient. 50lbs. covers 17,000 sq ft and on the herbicide I am using Trimec Bentgrass formula because I have quiet a few jugs in stock. I will be applying 1 oz per m. I realize this is a weak formula but it's frosting every morning and hey, you know.
Essentially, I'll need 30 bags @ approx 12.00 = 360.00 + 4 jugs of Trimec @ 23.00 = 92.00 and it will take me a couple of days to do it. $452.00 + gasoline + about 10 hours (estimating) is the cost but I've been using 2.50 per m on pricing smaller jobs, what does everyone else charge?
I guess I'm saying forget clarity and what I'm paying for fert, if you were my competition, what would "you" charge to be competitive based on your costs where you live?

Lazer
10-31-2000, 07:04 PM
This site would take us 5 hours or so to perform.

My material cost would be: $325 or so. $1305 is a pretty decent price. (2.50 sq. ft.)

lawrence stone
10-31-2000, 09:28 PM
Granular app $1200.

Liquid app $900. for $2100 total

Done over a two day period spray until the wind picks up then spread fert the rest of the days.

lawrence stone
11-06-2000, 01:26 AM
Well you can rest assured this will be the last time I provide any pricing info in this forum.

You don't even get a thank you from the SOB who asks the question.

Next time go pound sand Osc.

ant
11-06-2000, 06:00 AM
stone,lazer: thanks for the reply on his post,it helped me.
anthony

osc
11-09-2000, 07:12 PM
Sorry Stone, you know I have not been checking this thread as the election is keeping me glued to that other satanic device. Anyhow, THANKS!!
I don't think I'll get it at $2,100 though. What is pounding sand anyway?

Skookum
11-10-2000, 02:53 AM
OSC,

Could it have been your truck I seen at the GIE in Indianapolis on Monday on the 8th floor of the parking garage across the street from the convention center?

osc
11-10-2000, 08:02 AM
Nope, didn't make it to the GIE. Was someone using my name without my permission or is it another one of those scrub pics?