Spreader attached to hitch on Lazer Z

[onymous]

I have a Liquid Cooled Lazer Z with a 72" cut (LZ27LKA724).
I cut slowly as I'm dealing with gradual slopes.
I've ordered the hitch as I want to pull a fertlizer spreader behind me as I do the first cut of spring. The cutting area is about 9 acres.
I've lookes at the AgriFab pull-behind spreader but I need to restrict the spreading to 72" to avoid double-dosing and I'm not sure that the spread can be restricted to that narrow a width.
Any suggestions will be most welcome.

The Exmark Lazer Z is a great machine.

[rob1325]

Calaberate the spreader at half the setting.

[eXmark]

onymous,

Here's what I would recommend. If you can drag it up the hill yourself with realative ease with out getting tired or winded go for it. If not I wouldn't put the maching through it for any length of time. Remeber we only want 80 lbs. of draw weight or less. The Z's are great machines but they aren't realy intended to replace a tractor.

Thanks,

Terry