PDA

View Full Version : a little project


rookiemower
02-28-2004, 08:08 PM
I made this yesterday, its made for two blitz 6 gallons gas cans. I only have one right now; welded it with some expanded steel mesh

rookiemower
02-28-2004, 08:10 PM
i cant decide where to bolt it on my open trailer. I got sick of the recycle bin i had before, it was always sliding around

Lux Lawn
03-01-2004, 05:49 PM
Rookiemower

I am looking for something like that also.What I really want is a basket to mount along side of the trailer from the wheel up to the front of the trailer.I can't seem to find them anywhere the only thing I can find is the racks that hold one can.

If anyone has any information on something like that could you please let me know I would appreciate it very much.

The basket I am looking for is about 9 inches wide by about 6 foot
long.

Thanks again
Larry

BrianK10
03-01-2004, 07:44 PM
Nice little project you made there.

Brian

imograss
03-01-2004, 08:53 PM
Here is my gas can holder (it's on the front left lower fender)

Expert Lawns
03-01-2004, 09:05 PM
Anything wrong with having the gas cans that close to the ground? Would sparks from your trailer or safety chains possibly ignite some fumes? Mine are up pretty high, just never seen anyone carry them that low before.

X-mow
03-01-2004, 09:28 PM
I built a gas can rack from re-bar that fit over the trailers tongue.
it can hold 2 - 6 gal. cans and 1 - 2.5 gal can. ,but it's built to fit the V tongue on my trailer so others might be different.