best wrench for oil change

[vandrv]

I have a lazer Z HP with a 20 hp Kohler motor. I ahve yet to find a good rench to loosen the oil valve There is no shot of using a socket and very little turning room for a box wrench. Was just wondering if anyone has found a good solution for this. Thanks

[eXmark]

Vandry,

That's a tough one to get at for sure. I found that using a 10 mm socket with extension I can get at it pretty easy.

It's been a while but as I recall you must slide the socket and extension under the hydro hoses and onto the valve. Then attach you rachet.

Thanks,

Terry